🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.multimedia
3 messages
3 total messages Started by christos Sun, 08 Nov 1992 18:04
AT&T's new video phone.....
#738
Author: christos
Date: Sun, 08 Nov 1992 18:04
14 lines
849 bytes
Hello there,

	Has anybody seen the new AT&T video phone that AT&T advertises? It is
about 2.5 inches by 2 inches of area. Does anybody have any inforamtion about
the technical specifications of that phone? i.e. modulation scheme used,
compression ratio, compression coding scheme, pixel width on the screen, #of
bits/pixel, # of frames/sec etc.

	I would appreciate any relevant response or an AT&T telephone number
where I can get information about that.

Thanks,
Chris.
Internet Address:christos@kuhub.cc.ukans.edu
Re: AT&T's new video phone.....
#741
Author: Ari Ollikainen
Date: Sun, 08 Nov 1992 23:22
49 lines
2623 bytes
In article <1992Nov8.120424.44518@kuhub.cc.ukans.edu> christos@kuhub.cc.ukans.edu writes:
>Hello there,
>
>	Has anybody seen the new AT&T video phone that AT&T advertises? It is
>about 2.5 inches by 2 inches of area. Does anybody have any inforamtion about
>the technical specifications of that phone? i.e. modulation scheme used,
>compression ratio, compression coding scheme, pixel width on the screen, #of
>bits/pixel, # of frames/sec etc.
>
>	I would appreciate any relevant response or an AT&T telephone number
>where I can get information about that.
>

For More Information, Call: 1 800 437-9504

Or visit one of the AT$T Phone Centers near you...

For those unfamiliar with the AT$T VideoPhone 2500:

        1. 3.3 inch (diagonal) LCD screen
        2. Fixed focal length CCD camera
        3. Built into "feature phone" (hands-free, speakerphone, memory
           dialing, etc)
        4. "Full color, motion video"
        5. Privacy shutter for lens
        6. Uses "fax modem" technology to transmit "compressed digital video"
           (CLI's CDV) at 14.4kilobits/sec
	7. $1499 MSRP each
	8. ONLY works with other VideoPhone 2500s

I believe that the CDV codec, composed of a single IIT VP chip, produces 
128 X 114 images...which is less than H.261 Q-CIF (176 x 144). The early 
PR claimed frame rate "upto 10 frames/second" which I consider to be 
total baloney.

" A whole generation of young people are demanding video technology, and I
believe that by the year 2001, visual communications will become as important
to consumers as wireless communications," Kenneth M. Bertaccini, president
of AT&T Consumer Products.  

	" Who would you like to see TONIGHT? ...You'll never look
	  at phone calls the same way again. "
					-- AT$T Advertisement

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ari Ollikainen    ari@es.net     National Energy Research Supercomputer Center
ESnet (Energy Sciences Network)   Lawrence Livermore National Laboratory
510-423-5962  FAX:510-423-8744   P.O. BOX 5509, MS L-561, Livermore, CA 94550
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Re: AT&T's new video phone.....
#742
Author: Christopher Huffine
Date: Mon, 09 Nov 1992 00:43
15 lines
1206 bytes
christos@kuhub.cc.ukans.edu writes:
>Hello there,
>
>	Has anybody seen the new AT&T video phone that AT&T advertises? It is
>about 2.5 inches by 2 inches of area. Does anybody have any inforamtion about
>the technical specifications of that phone? i.e. modulation scheme used,
>compression ratio, compression coding scheme, pixel width on the screen, #of
>bits/pixel, # of frames/sec etc.

I have seen this phone in a technology demonstration for schools.  Although I
do not have specifics about it, it seem to transmit about 4-5 frames per
second.  The resolution could not have been above 100x100 or so. The b/w screen
in pretty small 3.5-4" in size, so the large pixels don't look to bad. 
 
--Cmh
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads