Re: Roland MPU/Windows 3.1 problem

Article View: comp.music

Article #3559

#3559

From: Chuck Munro
Date: Sat, 09 Jan 1993 23:13

12 lines
1007 bytes

I had this same problem with my PC ....  the Adaptec 1542 SCSI card has a
base I/O address of 330.

In my case, the Roland SCC-1 card has switches to change its base I/O to
330, 332, 334 or 336.  I also had to change its IRQ to 5, because its
default 2 was already in use.

Everything plays together happily now, but I sure wish I could get the
Roland hardware and software for a UNIX workstation instead!!  (HP9000
series 700)

Chuck.

Technical Details

Message-ID: <C0M0Hw.5K1@waterloo.hp.com>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!col.hp.com!news.dtc.hp.com!hpscit.sc.hp.com!cupnews0.cup.hp.com!hppad.waterloo.hp.com!chuckm

References: <1993Jan09.013609.21216@convex.com>

Show Full Headers

Complete Article Headers

Newsgroups: comp.music
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!col.hp.com!news.dtc.hp.com!hpscit.sc.hp.com!cupnews0.cup.hp.com!hppad.waterloo.hp.com!chuckm
From: chuckm@canada.hp.com (Chuck Munro)
Subject: Re: Roland MPU/Windows 3.1 problem
Sender: news@waterloo.hp.com (NetNews)
Message-ID: <C0M0Hw.5K1@waterloo.hp.com>
Date: Sat, 9 Jan 1993 23:13:08 GMT
Distribution: inet
References: <1993Jan09.013609.21216@convex.com>
Organization: Hewlett-Packard Canada Ltd, Dartmouth, N.S.
X-Newsreader: TIN [version 1.1.4 PL6]
Lines: 13

Reply to Parent Message