🚀 go-pugleaf

In article <BzAw1F.FJB@brunel.ac.uk> David Thomas, David.Thomas@brunel.ac.uk
writes:
>Re: VT100 support
>
>In the documentation with the latest Kermit for AOS/VS, it talks about
>the XLT characteristic for VT100 support, and mentions the need to
>sysgen this in advance.
>
>All our System Generation is done by the software house that supply
>our library system. They say there may be a price to pay if I ask for
>VT100, that I might lose some ports on my IACs, but they don't seem to
>know for sure.

	You won't lose any of your ports and there's no price to pay. The only
thing to be aware of is that only on IAC-8s and IAC-12s will all the
terminals be able to configured as vt100. IAC-16s simply don't have enough
onboard
memory to support any more than 14 vt100 emulation at a time.
>
>My objective is simply to run utilities like PED and SED with
>MS-Kermit instead of our D211 emulator. I would only need VT100 support for
>a few lines, say up to 4.
>
>Can anyone clarify the limitations of VT100 support ?

	A note when using the escape key. Because all vt100 function key begin
with escape, the escape key is traped by the hardware driver to test whether
the user was pressing a funtion key or not. In this case just press escape
again
and the escape will then be transmitted. Also you would be best to use Kermit's
keymapping facility to map the funtion keys to the DG function keys.

>
>My set up is AOS/VS 7.67 with three IAC16s of 1987 vintage and one
>IAC8.

	I'd recommend the use of your IAC8. That way you only need to sysgen
one device. You'll also need to set ther characteristics for the terminal
*BEFORE* the user logs on, say when bringing up EXEC.

>
>David Thomas
>Brunel University Library
>Uxbridge
>Middlesex
>UB8 3PH

	Well, I hop all of this is of some help.

Cheers,
Paul.
--
 _--_|\   Paul Peterson,                            P.Peterson@ccsd.uts.EDU.AU
/      \  Systems Support Section,                          Ph: +61 2 330 2131
\_.--._/  University of Technology, Sydney,                  (Internal: x2131)
      v   PO Box 123, Boadway, NSW, 2007, Australia.       Fax: +61 2 330 1994