🚀 go-pugleaf

Here at RUC we have a MV with AOS/VS TCP/IP and also an Aviion
workstation. Unfortunately, the terminfo supplied with the
workstation for the DASHER terminal won't work with the terminal
in DG mode (it assumes ANSI). I have made the following terminfo
which works for two cases: DASHER connected to MV running TELNET
and DASHER on a Communications Server (terminalserver):

        TERM=d200-vs   TERM=d200-cs

         +--------+     +--------+
         | DASHER |     | DASHER |
         +--------+     +--------+
             |              |
             |              |
         +--------+     +--------+      +---------+
         | AOS/VS |     | BRIDGE |      | Aviion  |
         | TELNET |     | CS/200 |      | telnetd |
         +--------+     +--------+      +---------+
             |              |                |
             |              |                |
        ============================================

Comments, questions and/or fixes are most welcome!

--
      /|  /       Postmaster@RUC.dk               /^^^\     .----------------.
     / | /        DG-passer@RUC.dk               { o_o }    | SIMULA does it |
    /--|/         jba@dat.RUC.dk                  \ o / --> | with CLASS     |
`--'   '          rucjb@os1100.uni-c.dk        --mm---mm--  `----------------'

-------------------[cut here]------------------------------
#
# ruc:	DATA GENERAL terminals as used on Roskilde University Center
#
# The following description of the Data General DASHER D200 terminal
# was generated using infocmp(1).
#
d200|Data General DASHER D200,
	am, bw, msgr,
	cols#80, lines#24,
	bel=^G, blink=^N, bold=^^D^T, clear=\f, cr=\r,
	cub1=^Y, cud1=^Z, cuf1=^X, cup=^P%p2%c%p1%c, cuu1=^W,
	dim=^\, el=^K, home=^P\200\200, ind=\n, is1=^R^C,
	kHOM=^^\b, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^],
	kc1=^^\^, kc3=^^_, kclr=\f, kcub1=^Y, kcud1=^Z,
	kcuf1=^X, kcuu1=^W, kel=^K, kf1=^^q, kf10=^^z,
	kf11=^^{, kf12=^^|, kf13=^^}, kf14=^^~, kf15=^^p,
	kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, kf2=^^r,
	kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
	kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n,
	kf3=^^s, kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3,
	kf34=^^4, kf35=^^5, kf36=^^6, kf37=^^7, kf38=^^8,
	kf39=^^9, kf4=^^t, kf40=^^:, kf41=^^;, kf42=^^<,
	kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, kf47=^^",
	kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%, kf51=^^&,
	kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+,
	kf57=^^\,, kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s,
	kf7=^^w, kf8=^^x, kf9=^^y, khome=\b, ll=^P\200^W,
	mc0=^Q, nel=\n, rev=^^D, rmso=^^E^], rmul=^U,
	sgr=^^%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t^T%e^U%;%?%p4%t^N%e^O%;%?%p1%p5%|%t^\%e^]%;,
	sgr0=^O^U^]^^E, smso=^^D^\, smul=^T,

# Info:
#	DASHER D200 terminal used with MV running AOS/VS TCP/IP.
#
#	Some kind of optimization in curses(3) causes problem when
#	scrolling. The problem is most evident when scrolling very
#	short lines e.g. just a comment (#). By disabling cub1,
#	curses(3) will not use the errornous sequence {cud1,ind,cub1,cup1}
#	(ind puts cursor at column 0, cub1 then moves cursor to column 79
#	on the previous line). Instead {cud1,ind,cr,cup1} will be used.
#	However, having no cub1 means, that any cursor-left movement
#	causes some light flickering when the cursor goes {cr,cuf1....}.
#
#	How and why this affects cup I don't know, but cup doesn't work
#	reliably without cub1, so I have disabled cup too, without noticing
#	any slowdown in screen updates.
#
#		Jan B. Andersen <jba@dat.ruc.dk>
#		Computer Science Department
#		Roskilde University Center
#
d200-vs|dasher-vs|Data General DASHER D200,
	cub1@,
	cup@,
	use=d200,

# Info:
#	DASHER D200 terminal used with Bridge TCP/IP Communications Server
#
#	Appearently we get a full 8 bit communications path when using the
#	terminal server. This causes some problems when curses(3) tries to
#	output a string containing NULL's by sending the NULL as \0200,
#	hoping that the receiver strips the high bit. Disabling ll and
#	redefining home takes care of that problem. Now, could someone
#	please tell me how to get the NEWLINE key to work in the shell?
#
#		Jan B. Andersen <jba@dat.ruc.dk>
#
d200-cs|dasher-cs|dasher|Data General DASHER 200,
	ll@,
	home=\b,
	use=d200-vs,