eunice uucp

Thread View: comp.os.eunice

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Detlef Clawin Mon, 25 Apr 1988 16:02

#59

Author: Detlef Clawin
Date: Mon, 25 Apr 1988 16:02

5 lines
498 bytes

Is there anybody out there, who runs a uucp connection from a eunice-vax-host
to a unix (sys5 ) host over a serial link ?
We experienced lots of problems with lost data packets .....

What's wrong ?

Re: eunice uucp

#60

Author: Daniel R. Levy
Date: Wed, 27 Apr 1988 02:07

20 lines
1438 bytes

In article <118@rubmez.UUCP>, clawin@rubmez.UUCP (Detlef Clawin ) writes:
> Is there anybody out there, who runs a uucp connection from a eunice-vax-host
> to a unix (sys5 ) host over a serial link ?
> We experienced lots of problems with lost data packets .....
> 
> What's wrong ?

What kind of VMS VAX?  What version of Eunice?  What kind of SysV machine,
running what version of SysV?

We have had a 3B2/400 (1-MIP AT&T machine) running SVR2 talk 19200 baud with
a VAX 11/780 under Eunice 4.1 without any excessive "lost data packets."
In fact it's the 3B2 that throttled down first, not the VAX.  Presuming its
the Eunice end that's losing data, check the SET TERMINAL settings on the
port.  It should include /PASSALL and /EIGHTBIT.
-- 
|------------Dan Levy------------|  Path: ihnp4,<most AT&T machines>!ttrdc!levy
|              AT&T              |  Weinberg's Principle:  An expert is a
|       Data Systems Group       |  person who avoids the small errors while
|--------Skokie, Illinois--------|  sweeping on to the grand fallacy.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads