Thread View: comp.os.linux.announce
1 messages
1 total messages
Started by Werner Almesberger
Sun, 24 Jan 1993 22:31
ANNOUNCE: MS-DOS FS 0.9 (ALPHA) released
Author: Werner Almesberger
Date: Sun, 24 Jan 1993 22:31
Date: Sun, 24 Jan 1993 22:31
132 lines
6322 bytes
6322 bytes
A new test version 0.9 of the MS-DOS FS is on tsx-11.mit.edu and on
sunsite.unc.edu:/pub/Linux/Incoming named dosfs.9.tar.Z It can be
used with the 0.99pl4 kernel and possibly also with later versions.
Because there are many changes, this will be a test release that
isn't part of the official kernel for a while. The usual warnings
about ALPHA test software and especially file systems apply.
Among the new features are a better error reporting mechanism (much
less panics) and faster directory operations. There is also a file
system performance tester.
The relevant sections of the CHANGES file are attached to this
posting. They are followed by a performance comparison of this and
the previous version of the MS-DOS FS and the Minix FS.
- Werner
=================================== CHANGES ===================================
CHANGES FROM VERSION 8 TO 9
===========================
- FS errors are now handled by reporting the error and setting the
file system read-only rather than generating a kernel panic.
- renaming to a directory now extends the directory if it is full.
- execute bits of regular files are now automatically set unless the
file system is mounted noexec.
- mode changes are automatically normalized, attempts to change
uid/gid are denied.
- added support for logical sectors > 512 bytes. (Based on a patch
from Drew Eckhardt.)
- the last free cluster pointer is now maintained on a per-FS
basis. This should give better performance when using multiple
MS-DOS filesystems in parallel.
- directory lookups are now performed per cluster rather than per
directory entry. This should be much faster.
- FAT entries of open moved files are now cached and the cache
entries are invalidated on the last close. So we'll get decent
performance even in this case.
- 0xF6-filled directory entries are now recognized as being empty.
- spaces are now disallowed in file names if "strict" checking is
enabled.
- on-disk data structures are now accessed through macros to allow
for easy addition of byte order conversion.
- added new binary extensions TAZ, TZP and TPZ
- added more comments, miscellaneous cleanup.
- smount now supports -o remount.
- added a file system performance tester.
- updated and extended the regression test.
- removed compiler warnings from fromdos.c
INTERIM CHANGES SINCE VERSION 8
===============================
- fixed FS corruption after renaming of directories.
- fixed accidential disabling of the FAT cache in alpha.8.
=========================== Performance comparison ============================
(Summary)
Environment: 386DX/25, no cache, 8MB RAM, 0.99pl1 kernel, no update
running, no other system activity, IDE disk.
All times are in milliseconds.
dosfs 0.8 dosfs 0.9 Minix FS
Allocate new blocks 1852 1835 1637
Read pre-allocated 347 354 300
Read pre-allocated (reverse) 10842 10644 452
Writing pre-allocated 1738 1549 1326
File creation 25.9 5.2 2.6
Directory lookups 5.4 1.5 1.5
Directory lookups (reverse) 5.4 1.5 1.5
Directory reads 0.3 0.3 0.2
File deletion 4.7 1.3 1.2
-------------------------------- Common header --------------------------------
File system performance test.
Iterations per test 10
File size 4 MB
Directory entries 100
-------------------------------- MS-DOS FS 0.8 --------------------------------
Allocating new blocks ... 1852500 [1202500,2360000] usec/MB
Reading pre-allocated blocks ... 347500 [347500,347500] usec/MB
Reading pre-all. blocks in rev. order ... 10842250 [10840000,10845000] usec/MB
Writing pre-allocated blocks ... 1738000 [1630000,1847500] usec/MB
File creation ... 25850 [25800,25900] usec/file
Directory lookups ... 5410 [5200,5600] usec/file
Directory lookups in reverse order ... 5380 [5300,5500] usec/file
Directory reads ... 270 [200,300] usec/file
File deletion ... 4690 [4600,4800] usec/file
-------------------------------- MS-DOS FS 0.9 --------------------------------
Allocating new blocks ... 1835500 [1187500,2295000] usec/MB
Reading pre-allocated blocks ... 354250 [350000,392500] usec/MB
Reading pre-all. blocks in rev. order ... 10644250 [10642500,10645000] usec/MB
Writing pre-allocated blocks ... 1548500 [1545000,1557500] usec/MB
File creation ... 5240 [5100,5400] usec/file
Directory lookups ... 1510 [1300,1600] usec/file
Directory lookups in reverse order ... 1500 [1400,1600] usec/file
Directory reads ... 270 [200,300] usec/file
File deletion ... 1300 [1200,1400] usec/file
---------------------------------- Minix FS -----------------------------------
Allocating new blocks ... 1637500 [1637500,1637500] usec/MB
Reading pre-allocated blocks ... 300000 [300000,300000] usec/MB
Reading pre-all. blocks in rev. order ... 452500 [452500,452500] usec/MB
Writing pre-allocated blocks ... 1326000 [1322500,1335000] usec/MB
File creation ... 2630 [2300,3300] usec/file
Directory lookups ... 1450 [1200,1700] usec/file
Directory lookups in reverse order ... 1450 [1400,1500] usec/file
Directory reads ... 200 [200,200] usec/file
File deletion ... 1180 [1000,1400] usec/file
--
_________________________________________________________________________
/ Werner Almesberger, ETH Zuerich, CH almesber@nessie.cs.id.ethz.ch /
/_IFW_A44__Tel._+41_1_254_7213___________________________________________/
--
Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads