🚀 go-pugleaf

try a recent kernel, 2.0.36pre or 2.1.126
2.0.30 gives lots of errors and 2.1.48 is way too old

Marc


Fco Javier Pulido Vaquero wrote in message
<71l8jg$r21$1@diana.bcn.ibernet.es>...
>Who can help me?
>
>e-mail : fjpulido@lobocom.es
>
>- Boot Warning (Only boots sometimes if I use Loadlin with LINUX
>                             KERNEL 2.0.30/2.0.34/2.1.48):
>
>  Probing PCI hardware
>  Unknown PCI device
>  PCI Device id=8A01
>  PCI Device id=7100
>  PCI Device id=7110
>
>- Sometimes the system emits the following message (kernel 2.0.39 -
Example)
>:
>
>booting ....
>(.......)
>Starting additional networking services:.
>double fault:0000
>CPU: 0
>EIP: 0010:[<001097F2>]
>EFLAGS: 00010246
>EAX: 7EFFE0C7  EBX: 0000096C  ECX: FFFFFC18  EDX: 00221DBC
>ESI: 002215E8  EDI: 00000000  EBP: 00000912  ESP: 00221598
>DS: 0018  ES:0018  FS: 002B  GS:0018  SS:0018
>
>Process swapper (pid:0 , process nr=0, stackpage=0021f60c)
>Stack: 00109847 00221DBC 0010A81D 00000100 0010946C 0000001E 002215E8
>00000000
>        00000912 FFFFFFDA 00000018 00000018 00000018 00000018 00000070
>00109033
>        00000010 00000246 00109227 00000000 68747541 000994C1 00101FFC
>00000000
>Call Trace: [<00109847>] [<0010a81d>] [<0010946c>] [<00109227>]
>[<00116f94>]
>             [<00111848>]
>Code: f4 83 3d f8 f5 21 00 00 75 0e e8 17 7e 00 00 83 3d f8 f5 21
>kfree of non-kmalloced memory: 00221854, next=00000000, order=0
>kfree of non-kmalloced memory: 00221644, next=00000000, order=0
>kfree of non-kmalloced memory: 00221b58, next=00000000, order=0
>idle task may not sleep
>
>- FILE /proc/pci
>  *****************
>
>PCI devices found:
>  Bus  0, device   9, function  0:
>    VGA compatible controller: S3 Inc. Unknown device (rev 1).
>      Vendor id=5333. Device id=8a01.
>      Medium devsel.  IRQ 10.  Master Capable.  Latency=64.  Min Gnt=4.Max
>Lat=255.
>      Non-prefetchable 32 bit memory at 0xf8000000.
>  Bus  0, device   7, function  3:
>    Bridge: Intel Unknown device (rev 1).
>      Vendor id=8086. Device id=7113.
>      Medium devsel.  Fast back-to-back capable.
>  Bus  0, device   7, function  2:
>    USB Controller: Intel Unknown device (rev 1).
>      Vendor id=8086. Device id=7112.
>      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.
>Latency=64.
>      I/O at 0xdf80.
>  Bus  0, device   7, function  1:
>    IDE interface: Intel Unknown device (rev 1).
>      Vendor id=8086. Device id=7111.
>      Medium devsel.  Fast back-to-back capable.  Master Capable.
>Latency=32.
>      I/O at 0xffa0.
>  Bus  0, device   7, function  0:
>    ISA bridge: Intel Unknown device (rev 1).
>      Vendor id=8086. Device id=7110.
>      Medium devsel.  Fast back-to-back capable.  Master Capable.  No
>bursts.
>  Bus  0, device   0, function  0:
>    Host bridge: Intel Unknown device (rev 1).
>      Vendor id=8086. Device id=7100.
>      Medium devsel.  Master Capable.  Latency=32.
>
>
>- FILE /proc/Meminfo (128 Mbytes RAM)
>  **********************************************
>        total:    used:    free:  shared: buffers:  cached:
>Mem:  65294336 32698368 32595968  4386816 24461312  3866624
>Swap: 16510976        0 16510976
>MemTotal:     63764 kB
>MemFree:      31832 kB
>MemShared:     4284 kB
>Buffers:      23888 kB
>Cached:        3776 kB
>SwapTotal:    16124 kB
>SwapFree:     16124 kB
>
>
>- Mainboard features:
>
>- Processor: AMD K6-2 300 Mhz
>- RAM: SDRAM 128 Mbytes (2 modules DIMM 64 Mbytes)
>- Intel i430TX PCI chipset
>- Supports Pentium 75-300 Mhz CPUs with ZIF socket, including
>    Pentium P54C and P55C (MMX), Cyrix/IBM 6X86/6x86L/6x86MX (M2),
>    IDT C6, and AMD K5/K6 CPUs.
>- Chipset (Socket 7, intel 82371AB, intel 82439TX)
>- Provides CPU Plug & Play (Auto Voltage/Frequency/Bus Frequency
>    Ratio) techniques for faster and eaiser CPU installation.
>- Provides auto switching power 2.0V to 3.5V for CPU core voltage.
>- Supports 64M-bit (16Mx4,8Mx8,4Mx16) DRAM/SDRAM technology.
>- Provides 4x72-pin SIMM modules auto banking in multiple configu-
>   ration up to 256MB and also, 2 x 168-pin DIMM to support SDRAM/EDO
>   DRAM/Page Mode DRAM up to 256MB.
>- Supports onboard 512KB Pipelined Burst synchronous L2 cache.
>- Supports Ultra DMA/33 and ACPI.
>- Provides dual ATX (20-pin) and AT (12-pin) power conectors and
>   ATX power supports Suspend Switch, Power Button, Wake On LAN, and
>   Alarm Wake Up.
>- 4 PCI Local Bus slots and 3x16 bits ISA Bus slots.
>- PCI IDE Controller supports PIO Mode 0 to Mode 4,Ultra DMA/33 at
>    maximun transfer rate of 33 MB/s, and Bus Master IDE DMA Mode 2
>- Supports PS/2 Mouse conector and pin header.
>- Supports 2.88MB, Iomega ZIP-100M, and IDE LS-120 FDD;bootable from
>    floppy, HDD, CDROM, SCSI, NetWork, LS-120,ZIP, or others.
>- Onboard super Multi-I/O chip supports 2 serial ports with 16550 fast
>    UART compatible, 1 parallel port with EPP and ECP capabilities, and
>    one floppy disk drive interface with 1 MB/s data transfer rate.
>- Supports ATX FORM CARD containing PS/2 mouse, 2 USB interface, and
>    Infrared conectors (optional)
>- Onboard PCI Bus Master IDE interface supports 4 IDE devices with 2
>   channels; BIOS supports 4 IDE harddisk drives which do not need
>   device driver for S/W application and the capacity of each harddisk
>   can be larger than 528MB AND UP TO 8.5GB.
>- Sound Blaster 16/PRO compatible with stereo onboard.
>
>
>
>