🚀 go-pugleaf

I previously wrote:

>I have replaced my ALI 486 motherboard and BusLogic 445C SCSI HA (VL-bus)
>with an Asus TP4XE motherboard (Pentium 120) and a BusLogic 946C (PCI).

>The 946C will not work.

[ ... ]

>The 946C was set for i/o 330, IRQ 11 (Just like the AHA-1542), INT A,
>"level" interrupt. The BIOS revision is 4.86, the firmware revision is
>4.22, the hardware revision is Ae1.

Thank you all for helping me out on this problem. The problems turned
out to be an older, non-PnP compatible hardware revision.

Although my rev. Ae1 card was not new, it was still under warranty.
Backed up with net.information, my local dealer promptly replaced
the card with a rev. E card, even though this dealer no longer sells
BusLogic...

My rev. E card worked right out of the box, with the disk that
was previously connected to a 445C, and faster too.

BTW, does anyone know whether the new Linux BusLogic beta drivers
can be used with development kernels (1.3.40, for now) ?

Again, thanks,
Pim
-- 
E-mail : Pim Zandbergen <pim@cti-software.nl>
S-mail : Laan Copes van Cattenburch 70, 2585 GD The Hague, The Netherlands
Phone  : +31 70 3542302
Fax    : +31 70 3512837