Re: ? NCR 53c810 scsi adapter problems

Article View: comp.os.linux.hardware

Article #198

Back to comp.os.linux.hardware Previous Next

#198

From: grid9
Date: Tue, 16 Sep 1997 00:00

20 lines
1791 bytes

On 15 Sep 1997 15:10:53 GMT, bob@par.univie.ac.at (Bob Velkov) wrote:

>Hi there! 
>
>Could anyone help me with the following problem:
>
>I have a Tyan TomCat III mobo running two 133Mhz Pentiums
>Linux 2.0.29, SMP enabled, NCR 53c810 support is compiled into 
>the kernel. 
[snip]

	I have an adapter with the same chip, made by Soyo. I don't
have the problem you are encountering. The controller I have doesn't
have a way to set termination on the board ( it has to be done on the
device that is last on the scsi chain ). On the controller there is a
Conner tape drive and a Zip insider. I am running Slackware kernel
2.0.29. One remedy for your problem ( since you don't have anything
plugged on it ) is to pull it out and put it back in when you buy some
scsi device ;-)

Technical Details

Message-ID: <341f10cd.1251560@news.hol.gr>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

References: <5vjj5t$dt0@www.univie.ac.at>

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 102b32,5b466deea5659622
X-Google-Attributes: gid102b32,public
X-Google-Thread: f4e7c,5b466deea5659622
X-Google-Attributes: gidf4e7c,public
X-Google-Thread: fb2b1,5b466deea5659622
X-Google-Attributes: gidfb2b1,public
X-Google-Thread: 109314,5b466deea5659622
X-Google-Attributes: gid109314,public
X-Google-Thread: f9b51,5b466deea5659622
X-Google-Attributes: gidf9b51,public
From: grid9@hotmail.com (grid9@hotmail.com)
Subject: Re: ? NCR 53c810 scsi adapter problems
Date: 1997/09/16
Message-ID: <341f10cd.1251560@news.hol.gr>
X-Deja-AN: 273105281
References: <5vjj5t$dt0@www.univie.ac.at>
Cache-Post-Path: pluto.hol.gr!unknown@port15.ath17.ppp.hol.gr
X-Complaints-To: usenet@newsmaster.hol.gr
X-Trace: newsmaster.hol.gr 874451037 31244 (None) 194.30.220.126
Organization: Hellas on Line - Pipex Intl
Newsgroups: comp.os.linux.hardware,comp.os.linux.setup,at.fido.linux,de.comp.os.linux.hardware,de.comp.os.linux.misc

Reply to Parent Message