Article View: comp.os.linux.hardware
Article #410Re: SCSI problems - 53c810, 1542, Gigabyte MB
From: Scott Howard
Date: Tue, 22 Aug 1995 00:00
Date: Tue, 22 Aug 1995 00:00
28 lines
1728 bytes
1728 bytes
Paul Ashman (paulk@grace.ssabsa.sa.gov.au) wrote: : In article <40l6gj$26@lucy.swin.edu.au>, 874860@bud.swin.edu.au says... : Disable your IDE disk controller when using the SCSI hard disk. Remove it : if you can. Do not mix IDE Hard Disks and SCSI Hard Disks in the one system. IDE and SCSI will work perfectly together in any system. There is absolutely no need to only use one or the other. : 1. set the SCSI ID of the first hard disk to 0 : the system will try to boot from SCSI device 0 on startup This is only needed if you want to boot from the scsi disk, although it doesnt hurt otherwise... : 2. ensure the SCSI chain is terminated correctly. This sounds a lot like it could be the real problem. Read the SCSI-Howto for details on how to do this (and make sure it's terminated at _both_ ends of the chain) : 3. ensure that the "BIOS is enabled" on the SCSI card so that the system : will try to boot from a SCSI device. Again, this is only if you want to boot from the scsi drive, although again it doesnt hurt otherwise. Scott.
Technical Details
Message-ID:
<41c7ha$b21@seagoon.newcastle.edu.au>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<40l6gj$26@lucy.swin.edu.au> <8127cb$c1e26.20a@murdoch.systems.sa.gov.au>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 102983,827f924b13a1faa6 X-Google-Attributes: gid102983,public X-Google-Thread: 102b32,827f924b13a1faa6 X-Google-Attributes: gid102b32,public From: c9219517@cs.newcastle.edu.au (Scott Howard) Subject: Re: SCSI problems - 53c810, 1542, Gigabyte MB Date: 1995/08/22 Message-ID: <41c7ha$b21@seagoon.newcastle.edu.au> X-Deja-AN: 108642386 references: <40l6gj$26@lucy.swin.edu.au> <8127cb$c1e26.20a@murdoch.systems.sa.gov.au> organization: The University of Newcastle followup-to: comp.os.linux.hardware,aus.computers.linux newsgroups: comp.os.linux.hardware,aus.computers.linux