🚀 go-pugleaf

If you have a point to point connection and are running "pppd" then you
can specify the serial device and speed when you start "pppd".

Example:
  /usr/sbin/pppd /dev/ttyS1 38400 ...
where ... stands for other parameters passed to "pppd".

This is what I do. Of course you may have to change ttyS1 to the
appropriate device. I'm using a USR 33.6k internal fax/modem and I
typically connect at 31.2k with this setting.

Reply to: rcooper@pangea.ca (mail checked weeknights / weekends)
          rcooper@ism.ca (mail checked weekdays, business hours).=20

On Mon, 10 Nov 1997, Bill Brittain wrote:

> Did you try setserial /dev/cuaX to see if your port is set to spd_vhi?=20
> If it's not that would really drag things down.
>=20
> Bill
>=20
>=20
> Marc Clayton wrote:
> >=20
> > I have a USR Courier 33.6 V.Everything connecting my linux proxy server
> > through a dedicated dial-up to my ISP with another USR Courier 33.6
> > V.Everything - the modems appear to be set correctly but they will only
> > connect at 19200. I was under the impression that 28.8 was attainable
> > approaching 38400 on a good phone line day. Phone Company's GTE.
> >=20
> > Any suggestions no =E0)
> > =94L=C0j=8B=C9=08Ea=93\@u=06Y/=CF=C8=F5=80=01=01=14w=04=1C=1EOO=88M=CB=
=D9P=18=1C=CEv=9C340 send article to be posted. End with <CR
>=20
> --=20
>=20
> Bill Brittain
> brittain@erols.com
>=20