🚀 go-pugleaf

Hi,

I have the ati 128 fury and i could configure it with FBDev (and kernel
2.2.5, RedHat 6)

I think the 0317 value is when you answer to the lilo prompt (when vga=ask)
This is in hexa.
But in /etc/lilo.conf you must put it in decimal: 791


Here are other values:

Colors      800x600                1024x768

16bits      0314 (788)            0317 (791)
24bits      0315 (789)            0318 (792)

And look at mini-howto for vesa

Good luck


javierlt a �crit dans le message <373EF2B1.F46905EC@mx3.redestb.es>...
>Hi all
>I�m trying to configure my graphics board (see topic) following the
>instructions of this newsgroup (comp.os.linux.hardware) but it doesn�t
>work.
>If I try to change the vga resolution with 0317 parameter in my
>lilo.conf file, the screen becomes black and I have to shutdown the
>system.
>If I configure XF86Config with the FBDev driver I get this messages when
>type startx:
>
>---------------------------------------------------
>XFree 86 Version 3.3.2 /X Window System
>(protocol Version 11, revision 0,  vendor release 6300)
>Release date: March 2 1998
>Operating System: Linux 2.1.119 i 686 [ELF]
>Configured drivers:
>FBDev: Server for frame buffer device
>(patchlevel 7): mfb, iplan2p2, iplan2p4, iplan2p8, ilbm, afb, cfb8,
>cfb16, cfb32
>
>Fatal sever error:
>xf86OpenConsole: Cannot open /dev/fb0 (operation not supported by
>device)
>_X11TransSocketUNIXConnect: Can�t connect: errno = 111
>giving up
>--------------------------------------------------
>
>What�s the matter?
>
>Thanks in advance.