🚀 go-pugleaf

I can't seem to get raid0 working. I have my entire /dev/hdb and
/dev/hdc to allocate to the raid0 setup. So I make /etc/raidtab
as follows:
raiddev /dev/md0
        raid-level              0
        nr-raid-disks           2
        persistent-superblock   1
        chunk-size              16
        device                  /dev/hdb1
        raid-disk               0
        device                  /dev/hdc1
        raid-disk               1

I've also put /dev/hdb and /dev/hdc in place of hdb1 & hdc1,
but to no avail. This is what happens:

[root@nullity ~]$ mkraid /dev/md0
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/hdb1, 26586976kB, raid superblock at 26586880kB
disk 1: /dev/hdc1, 40017883kB, raid superblock at 40017792kB
mkraid: aborted, see the syslog and /proc/mdstat for potential clues.


so I cat /proc/mdstat:

Personalities :
read_ahead not set
md0 : inactive
md1 : inactive
md2 : inactive
md3 : inactive
 
And what file is it referring to when it says syslog? /var/log
/messages says nothing about this. What should I do to get it
working?

Thanks,
Moshe

-- 
Moshe Jacobson - jehsom@REMOVE-MEresnet.gatech.edu
ICQ 1900670 - 350467 GT Station - 6-0985 - HEF 214