🚀 go-pugleaf

hello,

here is the method i used to install the sblive value driver to my
redhat 6.0 + cle v 0.8.

first download the driver from creative hp. untar it and read the README
file.
if u are using the cle 2.2.5 kernel, copy the sblive.o-2.2.5 to
/lib/modules/2.2.5-15CLE/msic/sblive.o

go to /etc, edit the conf.modules and add the following line to this
file:
alias sound sblive

then go to /etc/rc.d, edit the rc.local and add this two lines at the
end of this file and save it:

insmod -f sblive
modprobe sblive

the last thing to do is to reboot the system. u will find that there is
a fail message during the boot up but it does matter.

i hope this can help some of u.

thanks.

ray