🚀 go-pugleaf

In article <3a2en3$3a0@novanet.com> nathan@novanet.com (Nathan Stratton) writes:
> Hi, I have a TeleBit NetBlazer ST and I am trying to get it to work right 
> with Linux. Ok this is my problem, my users dialin toteh NetBlazer and a 
> command line does a rlogin to my main server. This workes great, the 
> problem is when user try to download a fiel with sz, sx, or kermit they 
> get a LOT of errors every sec or so, and you can't upload at all. I also 

Try "rlogin -8 -noesc".  The "-8" is necessary to get an eight-bit transparent
connection.  The "-noesc" tells the NetBlazer to ignore the session escape
sequence (default ^]<cr>) which would otherwise suspend the rlogin session
and return to the NetBlazer command prompt.  This is necessary to prevent
failure of file transfers that just happen to contain the escape characters
in the data.

Otherwise you could try "telnet -8 -noesc".  The "-8" option to the NetBlazer
telnet client passes eight bits but does *not* negotiate Telnet binary mode
like the "-b" option does.  The problem with using "-b" is that most Unix
hosts will set the pty to raw mode so you don't get the usual <cr> to <lf>
mapping.  If you do use "-b", you will probably have to give a "stty sane<lf>".

I haven't tried any of this with Linux yet, as I only just installed Linux
on my home system last night.

Cheers,
Eric