🚀 go-pugleaf

James Mandy wrote:

> Could anyone help me with this error message? (cut from /var/log/messages)
>
> Mar 29 07:36:20 delta pppd[18344]: pppd 2.3.5 started by root, uid 0
> Mar 29 07:36:20 delta pppd[18344]: Using interface ppp0
> Mar 29 07:36:20 delta pppd[18344]: Connect: ppp0 <--> /dev/ttyp0
> Mar 29 07:36:41 delta pppd[18344]: Terminating on signal 15.
> Mar 29 07:36:47 delta pppd[18344]: Connection terminated.
> Mar 29 07:36:47 delta pppd[18344]: Receive serial link is not 8-bit clean:
> Mar 29 07:36:47 delta pppd[18344]: Problem: all had bit 7 set to 0
> Mar 29 07:36:48 delta pppd[18344]: Exit.
>
> After starting pppd from my script. (btw, the script has always worked will
> in the past)
> Perhaps the modem needed a reset? like a hard reset? hrmm.
>
> Cheers, James.

I have received this in the past and it was due to my login script.  Nowadays
my script is reduced simply to:
expect 'ogin:'
expect 'assword:'

--
Scott Stahl
MIS Asst.
Illinois Housing Development Authority

TS Stahl wrote:

> James Mandy wrote:
>
> > Could anyone help me with this error message? (cut from /var/log/messages)
> >
> > Mar 29 07:36:20 delta pppd[18344]: pppd 2.3.5 started by root, uid 0
> > Mar 29 07:36:20 delta pppd[18344]: Using interface ppp0
> > Mar 29 07:36:20 delta pppd[18344]: Connect: ppp0 <--> /dev/ttyp0
> > Mar 29 07:36:41 delta pppd[18344]: Terminating on signal 15.
> > Mar 29 07:36:47 delta pppd[18344]: Connection terminated.
> > Mar 29 07:36:47 delta pppd[18344]: Receive serial link is not 8-bit clean:
> > Mar 29 07:36:47 delta pppd[18344]: Problem: all had bit 7 set to 0
> > Mar 29 07:36:48 delta pppd[18344]: Exit.
> >
> > After starting pppd from my script. (btw, the script has always worked will
> > in the past)
> > Perhaps the modem needed a reset? like a hard reset? hrmm.
> >
> > Cheers, James.
>
> I have received this in the past and it was due to my login script.  Nowadays
> my script is reduced simply to:
> expect 'ogin:'
> expect 'assword:'
>
> --
> Scott Stahl
> MIS Asst.
> Illinois Housing Development Authority

> Mar 29 07:36:47 delta pppd[18344]: Receive serial link is not 8-bit clean:
> Mar 29 07:36:47 delta pppd[18344]: Problem: all had bit 7 set to 0

Or maybe you had missed out one authentication from the remote computer, like
requesting for ppp dialup ....

@ndy

In aus.computers.linux on Mon, 29 Mar 1999 09:26:41 +0800
James Mandy <james@quest.com.hk> wrote:
>
>Could anyone help me with this error message? (cut from /var/log/messages)
>
>Mar 29 07:36:20 delta pppd[18344]: pppd 2.3.5 started by root, uid 0
>Mar 29 07:36:20 delta pppd[18344]: Using interface ppp0
>Mar 29 07:36:20 delta pppd[18344]: Connect: ppp0 <--> /dev/ttyp0
>Mar 29 07:36:41 delta pppd[18344]: Terminating on signal 15.
>Mar 29 07:36:47 delta pppd[18344]: Connection terminated.
>Mar 29 07:36:47 delta pppd[18344]: Receive serial link is not 8-bit clean:
>Mar 29 07:36:47 delta pppd[18344]: Problem: all had bit 7 set to 0
>Mar 29 07:36:48 delta pppd[18344]: Exit.
>

Have you read the PPP HOwto?  (always the first port of call...)

To whet your appetite:

 18.3.  The syslog says "serial line is not 8 bit clean..."

  There are variations on this too - such as serial line looped back
  etc., and the cause can be one (or a sequence) of a number of things.


So now you can go and read it yourself.  If you don't have HOWTOs
installed on your system you can read it at the Linux Documentation
Project at www.linux.org.au

Zebee