🚀 go-pugleaf

Xiaoqiang Luo wrote:
> 
> hi,
> 
> I have been using linux1.2.13(slackware 3.0.0) for a while and it works
> just fine till yesterday -- after I moved my PC from one room to the
> other, my linux cannot be booted. I am quite sure this is not due to
> hardware failure(of moving-related) because (1) I have a partition where
> I installed Win95 and it worked fine as usual after I moved my PC; (2)
> today I was able to use slackware rescue-disk to boot my PC and mount
> the linux partition on /mnt. I then ran e2fsck and the filesystem seemed
> fine because I can access files on the filesystem. But I simply cannot
> boot ..
> 
> OK, here is my setup:
> 
> -1.08GB IDE harddrive with 3 partitions;
>          /dev/hda1: DOS/WIN95
>          /dev/hda2: linux swap
>          /dev/hda3: linux
> 
> And the following is a few lines seen when linux was booted:
> ....
> Linux version 1.2.13(root@bigkitty)(gcc version 2.7.0) #1 Tue Aug 22
> 22:35:35 CDT 1995
> Partition check:
>         hda: multiple mode turned off
>         hda: hda1 hda2 hda3
> VFS: Mounted root (ext2 filesystem) readonly
> Adding swap space: 34268 swap-space
> Unable to indentify CD-ROM format
> end_request: I/O error, dev 2100, sector 64
> iso_fs_read_super: bread failed, dev 0x2100, iso_blknum 16
> Unable to indentify CD-ROM format
> 
> ----- end of messages ------
> 
> The boot process seemed halted at some point!
> 
> AT first I thought the failure might be caused by CDROM -- linux seems
> to have trouble with it, but after I boot my system with floppy disks, I
> checked /var/log/messages on /dev/hda3 and found that I had these kind
> of messages of "Unable to indentify CD-ROM format" long long ago. My
> linux was bootable all the time prior to yesterday!
> 
> could linux gurus out there help me out? Particularly, I want to know
> what linux1.2.13 is doing after prompting "Unable to indentify CD-ROM
> format"? Please send your reply to xiao@jhu.edu. Many thanks in advance.

I've had mine lock up at more or less the same point.  I got rid of
/etc/rc.d and it just quit after adding swapspace.  I got swap out
of my /etc/fstab, and it just quit after "VFS: Mounted root (ext2...."

I later (after hitting the problem twice (and reinstalling to get rid
of it twice)) realized that it would lock up like this only after I 
shutdown from someplace other than the console (like a telnet session
on a win95 box here in the soho lan, or an xterm).

Is it right that you can't shutdown from anywhere but the console?
BTW, When my boot sequence locked up, I could still log in from a
non-console terminal.  Maybe you can do that.  The problem is that
if I did that, my machine thought that the terminal I logged in at
was the console!  Really wierd.  It would try to treat that terminal
(a telnet session from win95) as the console!  After I logged in over
telnet, the console would show a login prompt, but if you logged in,
the console would be treated as a terminal!

Just $.02 that I hope will contribute to figuring it out.

Background: Slackware from Infomagic Nov. 95 CD.  Kernel 1.2.13.

Bryan
-- 
Y W8 4MS?
LINUXNOW!