Re: New Modem won't connect/Linux

Article View: comp.os.linux.misc

Article #2

Back to comp.os.linux.misc Previous Next

From: Bob Hauck
Date: Mon, 30 Oct 1995 17:47

17 lines
1154 bytes

In article <471qho$7ba@usenet1.interramp.com>, pp001356@interramp.com writes:

|> there's anything wrong with the modem.  It works fine under 
|> Windows 3.1, but not under Linux, where it's run through 
|> /dev/cua3.  Here's the info 'setsetial' gives on /dev/cua3:
|> 
|> Line 3, UART 16550a, Port: 0x02e8, IRQ 3
|> Buad_base: 115200, close_delay: 50, divisor 0
|> Flags: spd_normal	skip_test

Anything on COM1 (/dev/cua0)?  IRQ 3 is shared between COM1 and COM3 
under DOS, but that arrangement won't work under Linux.  If you want
to use IRQ3, then COM1 must be disabled.

---
 Bob Hauck                              Wasatch Communcations Group
 bobh@wasatch.com                       Data (24 hrs): 801-272-3792

Technical Details

Message-ID: <47332q$i52@lonepeak.wasatch.com>

Path: arc1-ca.pugleaf.net!wasatch.com!bobh

References: <471qho$7ba@usenet1.interramp.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!wasatch.com!bobh
From: bobh@wasatch.com (Bob Hauck)
Newsgroups: comp.os.linux.misc,comp.dcom.modems
Subject: Re: New Modem won't connect/Linux
Date: 30 Oct 1995 17:47:06 GMT
Organization: Wasatch Communications
Sender: bobh@hauck_pc.slc.unisysgsg.com (Bob Hauck)
Message-ID: <47332q$i52@lonepeak.wasatch.com>
References: <471qho$7ba@usenet1.interramp.com>
NNTP-Posting-Host: hauck_pc.slc.unisysgsg.com

Reply to Parent Message