🚀 go-pugleaf

Anthony White <anthony_w@bigpond.com> writes:
>I have a serious problem getting an ISDN link up and running on
>RH 6.1.  My system is as follows:

>Pentium 200MMX, 64Mb RAM Kernel 2.2.13 compiled with HiSax NetJet
>drivers as part of the kernel.  (Siemens chip-set)

>Problem is that I can not even get the link started.

>There is a dial-up script and a semi-permanent link script
>from the vendor of the card.  When running these scripts nothing
>happens.  An error is reported like: File not found.  It is as if
>the file is not seen or not able to run.

>I think something is missing in my setup.

>I have also installed the isdn4-utils (Latest) but have no idea
>of what to do next.  Documentation seems very spread out and=20
>in-coherent.

>Is there a step by step guide on how to get things going?

>The steps should include every thing from (After) the point of=20
>compiling
>the utilities and kernel.

>I want a machine which is a mail server as well as a firewall between
>the internal network and the internet via an ISDN link.

If you have a Traverse card they have a step by step guide on their
website (www.traverse.com.au). However, I didn't like their method
particularly as it didn't fit in well with the RH system of doing
things. I found rh-isdn-conf-0.53-3 and rh-isdn-0.53-3, installed them
on the RH6.0 system. You may not need to do this on RH6.1 as it seems
to include the ISDN utilities and perhaps supports ISDN ippp devices.

I didn't have to compile the utilities or the kernel.

tom@interact.net.au