🚀 go-pugleaf

Greg Bastian wrote:

> Hi All,
>
> I have a RH 5.2 machine with two D-Link DFE-530TX 10/100 card, however,
> I cannot get the machine to recognise the second card.
>
> I have successfully had either card working, but not both.
>
> I have an "append ether=0,0,eth0 ether=0,0,eth1" in my lilo.conf
>
> I have
> alias eth0 via-rhine
> alias eth1 via-rhine
> in my conf.modules.
>
> On bootup, the eth0 is initialised, but I get a
> Delaying Eth1 initialization
> for the eth1 interface.
>
> Any help available ?
>
> Greg.

Did you try the ethernet cards alone? Their IRQ, I/O numbers must be
unique.

Try to swap the  ethernet devices at the append row. First the eth1 and
after this eth0 but it depends on the irq,I/O number. As I remeber we had
the same problem with ne2000 cards. Put the first place that card which
has less I/O or IRQ number ( I don't remember which one ). I hope this
will help.

Levente