🚀 go-pugleaf

"Haisam K. Ido" wrote:
> 
> I bought a "Linksys Wireless Cable/DSL Access Point + 4 Port Switch" and
>   it seemed flaky if one of the computers was disconnected and it would
> lockup for a long duration. So I thought that this may be a faulty
> switch and got a replacement and the same thing happened.  It seems to
> be ok when all the pc's connected to it and the switch are booted in the
> proper sequence.  Has anyone experienced this before?
> 
> I know that this is not a specific Linux question but all my pc's are
> linux ones :-)
> 
> What is an equivelant and reliable device?
> 
> Thanks in advance

The recommended device in all applications is the D-link DWL-900AP

It's about $180.00 or less, depending on where you shop.

It is an external unit which attached to an ethernet port. 

It requires USB, and Winblows, for the initial set-up, but once that is
done:

It can work as an Access Point.
It can work as an Access Point Client (perfect for desktop machines).
It can work as a point-to-point Wireless Bridge.
It can work as a point-to-multipoint Wireless Bridge, essential for
extending the Wireless InterNet. 

I don't know about the USB setup running under WINE, but the windows
management client is SNMP-based and runs well under WINE. And no, you can't
use `snmpset` to manage it, since it uses a totally proprietary subset of
enterprise-SNMP and it locks up as soon as you try to walk the MIBS tree
with `snmpget`. 

It is, however, only a one-port device.

If you need a good wireless access point and multiport router, the SMC
"Wireless broadband router" is quite good. I've had one up in the attic
running non-stop for almost a year.


see http://www.dlink.com and http://www.smc.com/ and look around. 

-- 
    Be kind to your neighbors, even though they be transgenic chimerae.
Whom thou'st vex'd waxeth wroth:  Meow. <-----> http://earthops.net/klaatu/