Article View: comp.os.linux.networking
Article #600Re: Dummy net device driver
From: Ivan A. Beveridge
Date: Mon, 27 Mar 1995 00:00
Date: Mon, 27 Mar 1995 00:00
24 lines
1606 bytes
1606 bytes
Following up your own posting, and all that ;^) Ivan A. Beveridge (iab@dreamtim.demon.co.uk) wrote: : Both of these (and possibly other) problems seem due to the fact that they : cannot "see" the SLIP interface when it is not up. I compiled the : dummy i/f driver into my kernel, and issued the following command: : ifconfig dummy xxx.xxx.xxx.xxx : (where xxx.xxx.xxx.xxx is the IP address of my SLIP port), but it still : had the same problems (I assume because "dummy" does not transmit packets ... : so how does it help in routing?). Someone mentioned to me that "dummy" had : to be taken down before the SLIP link could be set up. If this is so (sounds : fair enough), how can I "up" it again automatically when the SLIP link goes? Dear Ivan - I think you should try setting up a route before expecting packets to get routed "through" the dummy interface: route add -host xxx.xxx.xxx.xxx dummy (What a plonker ;) Ivan P.S. Cheers for your persistance Clive -- Ivan Beveridge <iab@dreamtim.demon.co.uk>
Technical Details
Message-ID:
<3l7ef4$b5@dreamtim.demon.co.uk>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<3kjsv8$4fh@euas20.eua.ericsson.se> <3l71mj$9m@dreamtim.demon.co.uk>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: fac57,9ca8f4d16fa021f0 X-Google-Attributes: gidfac57,public X-Google-Thread: 10669a,9ca8f4d16fa021f0 X-Google-Attributes: gid10669a,public From: iab@dreamtim.demon.co.uk (Ivan A. Beveridge) Subject: Re: Dummy net device driver Date: 1995/03/27 Message-ID: <3l7ef4$b5@dreamtim.demon.co.uk> X-Deja-AN: 100720350 references: <3kjsv8$4fh@euas20.eua.ericsson.se> <3l71mj$9m@dreamtim.demon.co.uk> followup-to: comp.os.linux.networking,demon.tech.unix newsgroups: comp.os.linux.networking,demon.tech.unix