🚀 go-pugleaf

Avec un - OLITEC self memory 33600 - et sa passerelle - mgetty1.0.0 -
(sous linux 2.0.29) je n'arrive pas � configurer mgetty pour que le
faxmodem fonctionne en mode fax et modem .


Le r�elle probleme serait de trouver la bonne chaine d'initialisation
qui se trouve dans policy.h ou dans le fichier
"/usr/local/etc/mgetty+senfax/mgetty.config" du style at&f&k6s25=20  ???


Cela fait d�j� un bon moment que je cherche sans trouver le moyen de le
faire fonctionner !!!
Si une ame charitable voulait bien m'aider ???


D'autant plus que j'ai des erreurs du type "/usr/local/sbin/senfax:cannot
set fax station ID" ; meme en changeant le numero de fax la meme erreur
revient ???

				****************

J'ai �galement plusieurs erreurs dans le fichier log_mg.ttyS1:
--
05/27 10:11:02 yS1  mgetty: official release 1.0.0
05/27 10:11:02 yS1  check for lockfiles
05/27 10:11:02 yS1  locking the line
05/27 10:11:03 yS1  WARNING: DCD line still active, check modem settings
(AT&Dx)
05/27 10:11:03 yS1  lowering DTR to reset Modem
05/27 10:11:04 yS1  send: ATZ[0d]
05/27 10:11:04 yS1  waiting for ``OK'' ** found **
05/27 10:11:05 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:11:05 yS1  waiting for ``OK''
05/27 10:11:25 yS1  timeout in chat script, waiting for `OK'
05/27 10:11:25 yS1  init chat timed out, trying force-init-chat
05/27 10:11:25 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
05/27 10:11:29 yS1  waiting for ``OK'' ** found **
05/27 10:11:29 yS1  send: ATZ[0d]
05/27 10:11:29 yS1  waiting for ``OK'' ** found **
05/27 10:11:31 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:11:31 yS1  waiting for ``OK''
05/27 10:11:51 yS1  timeout in chat script, waiting for `OK'
05/27 10:11:51 yS1  init chat failed, exiting...: Interrupted system call
05/27 10:11:51 ##### failed in mg_init_data, dev=ttyS1, pid=1401

--
05/27 10:11:51 yS1  mgetty: official release 1.0.0
05/27 10:11:51 yS1  check for lockfiles
05/27 10:11:51 yS1  locking the line
05/27 10:11:51 yS1  WARNING: DCD line still active, check modem settings
(AT&Dx)
05/27 10:11:51 yS1  lowering DTR to reset Modem
05/27 10:11:52 yS1  send: ATZ[0d]
05/27 10:11:52 yS1  waiting for ``OK'' ** found **
05/27 10:11:53 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:11:53 yS1  waiting for ``OK''
05/27 10:12:13 yS1  timeout in chat script, waiting for `OK'
05/27 10:12:13 yS1  init chat timed out, trying force-init-chat
05/27 10:12:13 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
05/27 10:12:17 yS1  waiting for ``OK'' ** found **
05/27 10:12:18 yS1  send: ATZ[0d]
05/27 10:12:18 yS1  waiting for ``OK'' ** found **
05/27 10:12:19 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:12:19 yS1  waiting for ``OK''
05/27 10:12:39 yS1  timeout in chat script, waiting for `OK'
05/27 10:12:39 yS1  init chat failed, exiting...: Interrupted system call
05/27 10:12:39 ##### failed in mg_init_data, dev=ttyS1, pid=1435

--
05/27 10:12:39 yS1  mgetty: official release 1.0.0
05/27 10:12:39 yS1  check for lockfiles
05/27 10:12:39 yS1  locking the line
05/27 10:12:40 yS1  WARNING: DCD line still active, check modem settings
(AT&Dx)
05/27 10:12:40 yS1  lowering DTR to reset Modem
05/27 10:12:41 yS1  send: ATZ[0d]
05/27 10:12:41 yS1  waiting for ``OK'' ** found **
05/27 10:12:42 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:12:42 yS1  waiting for ``OK''
--

 ... En re�ssayant plus tard sans rien  changer :


05/27 10:58:55 yS1  mgetty: official release 1.0.0
05/27 10:58:56 yS1  check for lockfiles
05/27 10:58:56 yS1  locking the line
05/27 10:58:56 yS1  WARNING: DCD line still active, check modem settings
(AT&Dx)
05/27 10:58:56 yS1  lowering DTR to reset Modem
05/27 10:58:57 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:58:57 yS1  waiting for ``OK''
05/27 10:59:17 yS1  timeout in chat script, waiting for `OK'
05/27 10:59:17 yS1  init chat timed out, trying force-init-chat
05/27 10:59:17 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
05/27 10:59:21 yS1  waiting for ``OK'' ** found **
05/27 10:59:22 yS1  send: AT&F&K6V0S25=20[0d]
05/27 10:59:22 yS1  waiting for ``OK'' ** found **
05/27 10:59:32 yS1  send: AT&F&V[0d]
05/27 10:59:32 yS1  do_stat: expect 'OK' ** found **
05/27 10:59:32 yS1  mdm_send: 'AT+FCLASS=2.0' -> OK
05/27 10:59:32 yS1  mdm_send: 'AT+FAA=1;+FCR=1' -> OK
05/27 10:59:32 yS1  mdm_send: 'AT+FBO=1' -> ERROR
05/27 10:59:32 yS1  cannot set bit order, trying +BOR=0
05/27 10:59:32 yS1  mdm_send: 'AT+FBO=0' -> ERROR
05/27 10:59:32 yS1  mdm_send: 'AT+FNR=1,1,1,0' -> ERROR
05/27 10:59:32 yS1  mdm_send: 'AT+FLI="55"' -> ERROR
05/27 10:59:32 yS1  cannot set local fax id. Huh?
05/27 10:59:33 yS1  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> ERROR
05/27 10:59:33 yS1  mdm_send: 'AT+FCC=1,3,0,2,0,0,0,0' -> ERROR
05/27 10:59:33 yS1  huh? Cannot set +FDCC parameters
05/27 10:59:33 yS1  waiting...
05/27 10:59:56 yS1  lock not made: lock file exists

***************************************************************
Que veulent dire ces erreurs et comment les corriger ???

"init chat failed, exiting...: Interrupted system call"
"failed in mg_init_data, dev=ttyS1, pid=1435"

'AT+FBO=1' -> ERROR
 cannot set bit order, trying +BOR=0
'AT+FBO=0' -> ERROR
'AT+FNR=1,1,1,0' -> ERROR

'AT+FLI="55"' -> ERROR
 cannot set local fax id. Huh?

(pourquoi il ne prend pas ce numero de fax ???



'AT+FCC=1,5,0,2,0,0,0,0' -> ERROR
'AT+FCC=1,3,0,2,0,0,0,0' -> ERROR
 huh? Cannot set +FDCC parameters

****************************************************************
				***************

En changeant de chaine d'initialisation dans mgetty.config :
init-chat "" AT&F&K3V0S25=20S95=47 OK

(chaine trouvee dans un fichier texte sous Window95 pour olitec)

Le fichier log_msg.ttyS1 prend cet forme :

05/27 11:01:19 yS1  timeout in chat script, waiting for `OK'
05/27 11:01:19 yS1  init chat timed out, trying force-init-chat
05/27 11:01:19 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
05/27 11:01:23 yS1  waiting for ``OK'' ** found **
05/27 11:01:23 yS1  send: AT&F&K6V0S25=20[0d]
05/27 11:01:23 yS1  waiting for ``OK''
05/27 11:01:43 yS1  timeout in chat script, waiting for `OK'
05/27 11:01:44 yS1  init chat failed, exiting...: Interrupted system call
05/27 11:01:44 ##### failed in mg_init_data, dev=ttyS1, pid=1801

--
05/27 11:06:45 yS1  mgetty: official release 1.0.0
05/27 11:06:45 yS1  check for lockfiles
05/27 11:06:45 yS1  locking the line
05/27 11:06:45 yS1  WARNING: DCD line still active, check modem settings
(AT&Dx)
05/27 11:06:45 yS1  lowering DTR to reset Modem
05/27 11:06:46 yS1  send: AT&F&K3V0S25=20S95=47[0d]
05/27 11:06:46 yS1  waiting for ``OK'' ** found **
05/27 11:07:03 yS1  send: AT&F&V[0d]
05/27 11:07:03 yS1  do_stat: expect 'OK' ** found **
05/27 11:07:03 yS1  mdm_send: 'AT+FCLASS=2.0' -> OK
05/27 11:07:04 yS1  mdm_send: 'AT+FAA=1;+FCR=1' -> OK
05/27 11:07:04 yS1  mdm_send: 'AT+FBO=1' -> ERROR
05/27 11:07:04 yS1  cannot set bit order, trying +BOR=0
05/27 11:07:04 yS1  mdm_send: 'AT+FBO=0' -> ERROR
05/27 11:07:04 yS1  mdm_send: 'AT+FNR=1,1,1,0' -> ERROR
05/27 11:07:04 yS1  mdm_send: 'AT+FLI="55"' -> ERROR
05/27 11:07:04 yS1  cannot set local fax id. Huh?
05/27 11:07:04 yS1  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> ERROR
05/27 11:07:04 yS1  mdm_send: 'AT+FCC=1,3,0,2,0,0,0,0' -> ERROR
05/27 11:07:04 yS1  huh? Cannot set +FDCC parameters
05/27 11:07:04 yS1  waiting...
05/27 11:07:37 yS1  lock not made: lock file exists


A premi�re vue il met les meme erreurs qu'avec la chaine pr�c�dente,
donc que dois- je faire pour que cela marche ????

				***************


Dans mgetty.config
Est-ce que ceci est correct ????


# mgetty configuration file
#
# this is a sample configuration file, see mgetty.info for details
#
# comment lines start with a "#", empty lines are ignored


# ----- global section -----
#
# In this section, you put the global defaults, per-port stuff is below


# set the global debug level to "5" (which is quite verbose)
# debug 5

# set the local fax station id
# ceci est un numero de fax local
fax-id 55

# access the modem(s) with 38400 bps
speed 115200

# the /dev/tty-device is owned by uucp.uucp and mode "rw-rw-r--" (664)
port-owner uucp
port-group uucp
port-mode 0664

# incoming faxes are owned by "root.uucp" and mode "rw-r-----" (640)
fax-owner root
fax-group uucp
fax-mode 0640


# ----- port specific section -----
#
# Here you can put things that are valid only for one line, not the others
#

# Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging
#
#port ttyS0
#  debug 3
#  data-only y

# ZyXEL 2864, connected to ttyS1: maximum debugging, grab statistics
#
port ttyS1
#  debug 8
#  init-chat "" ATZ OK AT&F OK
   init-chat "" AT&F&K6V0S25=20 OK
#  statistics-chat "" ATI6 OK
#  statistics-file /tmp/statistics.2864
#  modem-type c2.0

				****************
Dans /etc/inittab
j'ai ceci lancement de mgetty pour l'utiliser en mode automatique fax ou
modem .

Est-ce correct ???

s1:456:respawn:usr/local/sbin/mgetty ttyS1 vt100

				****************

Et dans le fichier /tmp/statistiques.2864
je vous c�de la configuration du modem OLITEC Self Memory 33600:

--- Tue May 27 10:59:32 1997 ---
AT&F&V
ACTIVE PROFILE:
B00 E1 L2 M1 Q0 T V1 W2 X4 &A0 &C1 &D2 &G2 &K3 &Q5 &R1 &S0 &X0 %C3 \N3 &Y0
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:007 S07:140 S08:002
S09:006
S10:014 S11:070 S12:020 S18:000 S25:005 S26:001 S36:007 S37:000 S38:020
S44:020
TELEPHONE NUMBERS:
0=                                     1=
2=                                     3=
OK



Je vous remercie d'avance pour vos r�ponses.


						Olivier ALESSANDRI.

-------------------==== Posted via Deja News ====-----------------------
      http://www.dejanews.com/     Search, Read, Post to Usenet