🚀 go-pugleaf

Merci pour ton aide mais j'ai la m�me chose avec ne2k-pci ou atp !


Pour ceux qui auraient une id�e pr�cise, n'h�sitez pas � me faire vos
remarques.
Pour info la config de la carte r�seau c'est pour faire du Wanadoo Cable
 c'est pas gagner )

Olivier
--------------------
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel 82437VX Triton II (rev 2).
      Medium devsel.  Master Capable.  Latency=32.
  Bus  0, device   7, function  0:
    ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  No
bursts.
  Bus  0, device   7, function  1:
    IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
      Medium devsel.  Fast back-to-back capable.  Master Capable.
Latency=32.
      I/O at 0xf000 [0xf001].
  Bus  0, device  17, function  0:
    VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 0).
      Medium devsel.  IRQ 12.
      Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000].
  Bus  0, device  18, function  0:
    Multimedia video controller: Brooktree Bt848 (rev 18).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.
Latency=32.  Min Gnt=16.Max Lat=40.
      Prefetchable 32 bit memory at 0xe0800000 [0xe0800008].
  Bus  0, device  20, function  0:
    Ethernet controller: Winbond Unknown device (rev 0).
      Vendor id=1050. Device id=840.
      Medium devsel.  Fast back-to-back capable.  IRQ 5.  Master Capable.
Latency=32.  Min Gnt=1.Max Lat=16.
      I/O at 0x6100 [0x6101].
      Non-prefetchable 32 bit memory at 0xe0801000 [0xe0801000].
-------------------- ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0220-022f : soundblaster
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
0378-037a : parport0
0388-038b : Yamaha OPL3
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
f000-f007 : ide0
f008-f00f : ide1
-------------------- interrupt
           CPU0
  0:      24013          XT-PIC  timer
  1:        477          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:          7          XT-PIC  serial
  8:          2          XT-PIC  rtc
  9:          1          XT-PIC  soundblaster
 13:          1          XT-PIC  fpu
 14:        117          XT-PIC  ide0
 15:      26124          XT-PIC  ide1
NMI:          0
---------------------------- dmesg
Linux version 2.2.9-27mdk (root@locutus.mandrakesoft.com) (gcc version
pgcc-2.91.66 19990314 (egcs-1.1.2 release)) #1 Mon Jun 14 16:44:05 CEST 1999
Console: colour VGA+ 80x25
Calibrating delay loop... 121.24 BogoMIPS
Memory: 30752k/32768k available (964k kernel code, 408k reserved, 596k data,
48k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Cyrix 6x86L 2x Core/Bus Clock stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Cyrix processor with "coma bug" found, workaround enabled
POSIX conformance testing by UNIFIX
mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb380
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.10)
Real Time Clock Driver v1.09
PCSP 1.3 measurement: maximal samplerate 108470 Hz, 18356 Hz used
RAM disk driver initialized:  16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.19
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST3660A, ATA DISK drive
hdc: Maxtor 82160D2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST3660A, 520MB w/120kB Cache, CHS=1057/16/63
hdc: Maxtor 82160D2, 2060MB w/256kB Cache, CHS=4465/15/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 < hda5 >
 hdc: [PTBL] [523/128/63] hdc1 < hdc5 > hdc2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
Adding Swap: 65988k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
1993-1996
parport0: PC-style at 0x378 [SPP]
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
nfsd_fh_init : initialized fhcache, entries=256
lp0 out of paper
Thierry Pinelli <tpinelli@pinux.gyptis.frmug.org> a �crit dans le message :
slrn9b7shc.13s.tpinelli@scud.the.hell...
> Dans l'article <QRKs6.79$Dp1.394366@nnrp3.proxad.net>
> obruniau@hotmail.com �crivait :
>
> >J'avais un pb de config d'irq que j'ai r�gl�, maintenant j'ai le son !
> >Mais je n'ai toujours pas retrouv� ma carte r�seau.
> >J'ai mis dans /etc/conf.module
> >option eth0 ne irq=5
>
> ne = ISAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA