🚀 go-pugleaf

Have you re-built the initrd image by using
mkinitrd ?

If you have set 
[Y] in both 3com NIC support and NE2000
[Y] Enable IPv4 packet forwarding
when building the kernel, they are already
compiled into the kernel image.

You can check the eth drivers by
dmesg |grep eth

Can you actually use the ethernet by running the
new kernel?



HTH

"��d�W" wrote:
> 
> I have done this la !
> 
> Enbugger ���g��峹 <7ctncl$l52$1@imsp009a.netvigator.com>...
> >I am not sure if you are using RedHat.
> >If you are, please refer to this document for
> >version 2.2 kernel upgrade:
> >
> >http://www.redhat.com/support/docs/rhl/kernel-2.2/kernel2.2-upgrade.html
> >
> >Hints:
> >Have you done:
> >  make modules
> >and
> >  make modules_install
> >?
> >
> >"��d�W" wrote:
> >>
> >> Before, I haven't build the kernel.
> >> I need to prepare the file /etc/conf.modules:
> >>
> >> alias eth0 ne
> >> options ne io=0x300
> >> alias eth1 3c59x
> >>
> >> And today, I try to build the kernel.
> >> I have chosen the [Y] in both 3com NIC support and NE2000 support.
> >> So, I won't got this two modules(ne.o and 3c59x.o) any more during
> building.
> >> Then, the problem happened !!!
> >> On starting:
> >> ...
> >> Enable IPv4 packet forwarding.
> >> modprobe: can't locate module net-pf-5
> >> ...
> >> eth1: unknown interface.     (NE2000 NIC change from eth0 to eth1)
> >> modprobe: can't locate module net-pf-5
> >>
> >> What's more, I try to copy back the files:
> >>     ne.o       to /lib/modules/2.2.3/net/ne.o
> >>     3c59x.o to /lib/modules/2.2.3/net/3c59x.o
> >>
> >> Then the system report:
> >> ...
> >> modprobe: can't locate module net-pf-5
> >> insmod: /lib/modules/2.2.3/net/3c59x.o: kernel module version mismatch
> >>              /lib/modules/2.2.3/net/3c59x.o was compiled for kernel
> version
> >> 2.0.36 while this kernel is version 2.2.3.
> >> eht1: unknown interface.
> >> modprobe: can't locate module net-pf-5
> >> ...
> >>
> >> What should I do now, is that supports been compiled to kernel yet ???
> >> I have chosen [Y] for these 2 NIC support already !!!
> >> Would you please offer your Kindly Help ?
> >
> >--
> >Enbugger
> >
> >p.s. Remove /NO-SPAM/ for e-mail.

-- 
Enbugger

p.s. Remove /NO-SPAM/ for e-mail.