🚀 go-pugleaf

Thanks for your feedback !
But I am really a Newbie in Linux, especially in Building Kernel(the 1st
time).
I am not sure what your exactly mean ?

>well, your problem with the ethernet card is,  it could have been the
address
>of your e-card.
>first question to you is, have you ever, successfully ismod the card module
>before?

I don't understand what is [ismod].
The NICs work perfectly before compile the kernel.
    eth0 for NE2000(ISA) NIC connect to internet.
    eth1 for 3Com 3c905(PCI) NIC connect in ethernet LAN.
I need to file /etc/conf.modules to run it before.
alias eth0 ne
options ne io=0x300
alias eth1 3c59x



>the problem with your 2nd problem is, even you copy the module, seems like
it
>was build on a diff. kernel. that's why it won't match.

I understand that it is really a silly behaviour.
But I cannot get any ne.o and 3c59x.o for kernel 2.2.3 now.
I suppose it is embedded in the kernel image after it is compiled.
Anyway, is that any method to compile these 2 files for 2.2.3 other re-build
the kernel again ?



>p.s. does NE2000 uses 3c59 module??

No I copy both ne.o and 3c59x.o for kernel 2.0.36-0.7 to the new kernel.
Also, I am keeping the file /etc/conf.modules now.

Thank You !!!


-----ԭʼ�]��-----
�ļ���: Delson Hung <dhung@hknet.com>
��„Ⱥ�M: comp.os.linux.networking,hk.comp.os.linux,hk.comp.pc
����: 1999��3��18�� PM 12:00
��ּ: Re: ne.o & 3c509.o compiled ???


>"�ȿ���" wrote:
>
>> Before, I haven't build the kernel.
>> I need to prepare the file /etc/conf.modules:
>>
>> alias eth0 ne
>> options ne io=0x300
>> alias eth1 3c59x
>>
>> And today, I try to build the kernel.
>> I have chosen the [Y] in both 3com NIC support and NE2000 support.
>> So, I won't got this two modules(ne.o and 3c59x.o) any more during
building.
>> Then, the problem happened !!!
>> On starting:
>> ...
>> Enable IPv4 packet forwarding.
>> modprobe: can't locate module net-pf-5
>> ...
>> eth1: unknown interface.     (NE2000 NIC change from eth0 to eth1)
>> modprobe: can't locate module net-pf-5
>>
>> What's more, I try to copy back the files:
>>     ne.o       to /lib/modules/2.2.3/net/ne.o
>>     3c59x.o to /lib/modules/2.2.3/net/3c59x.o
>>
>> Then the system report:
>> ...
>> modprobe: can't locate module net-pf-5
>> insmod: /lib/modules/2.2.3/net/3c59x.o: kernel module version mismatch
>>              /lib/modules/2.2.3/net/3c59x.o was compiled for kernel
version
>> 2.0.36 while this kernel is version 2.2.3.
>> eht1: unknown interface.
>> modprobe: can't locate module net-pf-5
>> ...
>>
>> What should I do now, is that supports been compiled to kernel yet ???
>> I have chosen [Y] for these 2 NIC support already !!!
>> Would you please offer your Kindly Help ?
>
>well, your problem with the ethernet card is,  it could have been the
address
>of your e-card.
>first question to you is, have you ever, successfully ismod the card module
>before?
>
>the problem with your 2nd problem is, even you copy the module, seems like
it
>was build on a diff. kernel. that's why it won't match.
>
>p.s. does NE2000 uses 3c59 module??

>

Delson Hung ���g��峹 <36F07A76.62D697F1@hknet.com>...
>"��d�W" wrote:
>
>> Before, I haven't build the kernel.
>> I need to prepare the file /etc/conf.modules:
>>
>> alias eth0 ne
>> options ne io=0x300
>> alias eth1 3c59x
>>
>> And today, I try to build the kernel.
>> I have chosen the [Y] in both 3com NIC support and NE2000 support.
>> So, I won't got this two modules(ne.o and 3c59x.o) any more during
building.
>> Then, the problem happened !!!
>> On starting:
>> ...
>> Enable IPv4 packet forwarding.
>> modprobe: can't locate module net-pf-5
>> ...
>> eth1: unknown interface.     (NE2000 NIC change from eth0 to eth1)
>> modprobe: can't locate module net-pf-5
>>
>> What's more, I try to copy back the files:
>>     ne.o       to /lib/modules/2.2.3/net/ne.o
>>     3c59x.o to /lib/modules/2.2.3/net/3c59x.o
>>
>> Then the system report:
>> ...
>> modprobe: can't locate module net-pf-5
>> insmod: /lib/modules/2.2.3/net/3c59x.o: kernel module version mismatch
>>              /lib/modules/2.2.3/net/3c59x.o was compiled for kernel
version
>> 2.0.36 while this kernel is version 2.2.3.
>> eht1: unknown interface.
>> modprobe: can't locate module net-pf-5
>> ...
>>
>> What should I do now, is that supports been compiled to kernel yet ???
>> I have chosen [Y] for these 2 NIC support already !!!
>> Would you please offer your Kindly Help ?
>
>well, your problem with the ethernet card is,  it could have been the
address
>of your e-card.
>first question to you is, have you ever, successfully ismod the card module
>before?
>
>the problem with your 2nd problem is, even you copy the module, seems like
it
>was build on a diff. kernel. that's why it won't match.
>
>p.s. does NE2000 uses 3c59 module??
>