🚀 go-pugleaf

Wouter Verhelst wrote:
> 
> In article <970835395.212217@proxy.iqprobe.com>,
>         "Rapha�l Wouters" <rw@iqprobe.com> writes:
> > Hi,
> >
> > We have a problem with our server configuration.
> >
> > We have a NT server A and a Linux machine B, directly
> > connected to our ISP trough a hub. Everything works
> > well but after a while we can't connect from A to B or
> > from B to A (ping doesn't work anymore either)
> >
> > ISP
> >  |
> >  |
> >  HUB
> >  |     |
> >  A   B
> >
> > After rebooting the Linux machine, everything is working
> > fine again for a few days...
> >
> > What can be the problem?
> 
> According to my bowl of crystal, this _should_ be your networkcable
> which is broken.
> 
> Seriously: please, provide some more information, like the IP
> addresses you use, how your network is connected to the Internet,...
> 

OK, OK, let's play this game :)
Now, my bet (I *do* have a crystal ball, didn't you know?)
Hmmm... It works for few days, then it goes down, but if you restart the
linux box then everything is OK again for some time, ah?

Enough information for me.

...Rumble-mumble...

You're using your NIC card drivers as a module, don't you?
Compile them in the kernel.
(What's the prize?)

-- 
SALUD,
Jes�s
***
jesus_navarro@promofinarsa.es
***

In article <970835395.212217@proxy.iqprobe.com>,
	"Rapha�l Wouters" <rw@iqprobe.com> writes:
> Hi,
> 
> We have a problem with our server configuration.
> 
> We have a NT server A and a Linux machine B, directly
> connected to our ISP trough a hub. Everything works
> well but after a while we can't connect from A to B or
> from B to A (ping doesn't work anymore either)
> 
> ISP
>  |
>  |
>  HUB
>  |     |
>  A   B
> 
> After rebooting the Linux machine, everything is working
> fine again for a few days...
> 
> What can be the problem?

According to my bowl of crystal, this _should_ be your networkcable
which is broken.

Seriously: please, provide some more information, like the IP
addresses you use, how your network is connected to the Internet,...

-- 
wouter punt verhelst op advalvas in Belgi�
  4:06pm  up  2:51,  2 users,  load average: 1.05, 1.07, 1.05
Voor een vertaling van Documentation/Configure.help naar het Nederlands:
http://users.pandora.be/wouter.verhelst/configure.html

COMPASS [for the CDC-6000 series] is the sort of assembler one expects from
a corporation whose president codes in octal.
		-- J.N. Gray

On Fri, 06 Oct 2000 12:30:43 GMT, Rapha�l Wouters 
<rw@iqprobe.com> wrote:
>Hi,
>
>We have a problem with our server configuration.
>
>We have a NT server A and a Linux machine B, directly
>connected to our ISP trough a hub. Everything works
>well but after a while we can't connect from A to B or
>from B to A (ping doesn't work anymore either)
>
>ISP
>  |
>  |
> HUB
>  |     |
> A   B
>
>After rebooting the Linux machine, everything is working
>fine again for a few days...
>
>What can be the problem?

Are these the only two machines in the network?
Are they perhaps both DHCP servers?

Can you get us more info, because :"It doesn't work" just is not enough.

What have you done so far to solve the problem?
-- 
houghi		http://pizzadrivers.com		     http://www.houghi.org
Democracy is a form of government that substitutes election by the
incompetent many for appointment by the corrupt few.
		-- G. B. Shaw

On Fri, 06 Oct 2000 21:36:46 +0200, NAVARRO LOPEZ 
<hostmaster@promofinarsa.es> wrote:
>> Seriously: please, provide some more information, like the IP
>> addresses you use, how your network is connected to the Internet,...
>> 
>
>OK, OK, let's play this game :)
>Now, my bet (I *do* have a crystal ball, didn't you know?)
>Hmmm... It works for few days, then it goes down, but if you restart the
>linux box then everything is OK again for some time, ah?
>
>Enough information for me.
>
>...Rumble-mumble...
>
>You're using your NIC card drivers as a module, don't you?
>Compile them in the kernel.
>(What's the prize?)
>

Linus, move over, Navarro is here to take your place.

-- 
houghi		http://pizzadrivers.com		     http://www.houghi.org
This is a test of the emergency cunnilingus system. If this had been an
actual emergency, you would have known it!

What are your IP-Addresses at first ? Are they fix ? What I mean is, I have
an ADSL connection but I use a dedicated card for it, so whenever it's
address changes, my eth1 card address changes too, but my addresses "inside"
stay the same.

Please verify your IP-Addresses when everything works and when things don't
work anymore...



"Rapha�l Wouters" <rw@iqprobe.com> wrote in message
news:970835395.212217@proxy.iqprobe.com...
> Hi,
>
> We have a problem with our server configuration.
>
> We have a NT server A and a Linux machine B, directly
> connected to our ISP trough a hub. Everything works
> well but after a while we can't connect from A to B or
> from B to A (ping doesn't work anymore either)
>
> ISP
>   |
>   |
>  HUB
>   |     |
>  A   B
>
> After rebooting the Linux machine, everything is working
> fine again for a few days...
>
> What can be the problem?
>
> --
> Sincerely,
>
> Rapha�l Wouters - rw@iqprobe.com
> IQProbe NV - http://www.iqprobe.com
>
>