🚀 go-pugleaf

Append them to /etc/rc.d/rc.local

Keith McGaughran wrote:
> 
> Hi all
> 
> system
> redhat 6.0
> cpu    ibm 686 MII pr300
> hda     seagate medalist 6.5gig
> motherboard   EPoX    EP-MVP3G-M
> ram  64meg
> 
> I have read the man hdparm and have used it to set  32-bit I/O and
> using_dma  modes which has made the following improvements to disk
> performance
> 
> keith]# /sbin/hdparm -t /dev/hda
> /dev/hda:
>  Timing buffered disk reads:  32 MB in  6.53 seconds = 4.90 MB/sec
> 
> keith]# /sbin/hdparm -c1 /dev/hda
> /dev/hda:
>  setting 32-bit I/O support flag to 1
>  I/O support  =  1 (32-bit)
> 
> keith]# /sbin/hdparm -t /dev/hda
> /dev/hda:
>  Timing buffered disk reads:  32 MB in  4.60 seconds = 6.96 MB/sec
> 
> keith]# /sbin/hdparm -d1 /dev/hda
> /dev/hda:
>  setting using_dma to 1 (on)
>  using_dma    =  1 (on)
> 
> keith]# /sbin/hdparm -t /dev/hda
> /dev/hda:
>  Timing buffered disk reads:  32 MB in  3.68 seconds = 8.70 MB/sec
> 
> now the questions
> 
> I have tried the  -k  and  -K  flags to stop the kernel from resetting
> at boot  but I think they are only for a soft reset ( the -K flag was
> not supported by my drive) so what file do I have to edit to have these
> set at boot and can I put all the flags in the one line (I need to boot
> as it is duel boot and I still use win for games)
> 
> are the above numbers normal for this type of drive (udma 33) or are
> there other things I can do to improve the performance
> 
> all help greatly appreciated
> thanks in advance
> 
> Keith McGaughran

-- 
~ cry for help from a overworked box ~
I've been working for 17 weeks 3 days 15 hours 31 minutes
non-stop. Please ask my stupid owner to reboot me.
He can be reached at: regit@penguinpowered.com