🚀 go-pugleaf

--------------79E986ABD83B42B2C6FFBE13
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I had a similar problem some time ago with Linux, Windoze 95 and NT 4 on the
one hard drive.After much trial and error I managed to get it right by
installing the NT bootloader to boot NT or 95 and installing Lilo last.
So, on power-up I firstly get the Lilo prompt which will boot to either
Linux or the NT bootloader. Then the NT bootloader boots to NT4 or 95.
I dont know much about Win 2K, but hope this helps.

Warren Stramiello wrote:

> Ok, folks... how the heck do I set up LILO to boot to NT as well as
> Linux?
>
> Here's my partition setup for my boot drive:
>
> /dev/hda
>
> hda1 : 80mb blank FAT16 Partition (multi-purpose boot partition that
> isn't in use right now) (active)
> hda5 : Linux ext2 (Debian 2.2)
> hda6 : Linux swap
> hda7 : NTFS Windows2000 Partition (NT is installed into the Winnt
> directory)
>
> Here's my lilo.conf file info:
>
> boot=/dev/hda
> root=/dev/hda5
> compact
> install=/boot/boot.b
> delay=200
> map=/boot/map
> vga=normal
> image=/vmlinuz
>     label=Linux
>     read-only
> other=/dev/hda7
>     label=Win2k
>     loader = /boot/chain.b
>     unstable
>
> I nabbed the other...unstable bits from a help page... and oddly enough,
> it doesn't work.
> Whenever I choose the Win2k option, it gives me a 'PRESS CNTRL-ALT-DEL'
> message which, when complied with, bumps me into LILO again.
>
> So what am I doing wrong, and how do I fix it?
> ~Warren

--------------79E986ABD83B42B2C6FFBE13
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
I had a similar problem some time ago with Linux, Windoze 95 and NT 4 on
the one hard drive.After much trial and error I managed to get it right
by installing the NT bootloader to boot NT or 95 and installing Lilo <u>last.</u>
<br>So, on power-up I firstly get the Lilo prompt which will boot to either
Linux or the NT bootloader. Then the NT bootloader boots to NT4 or 95.
<br>I dont know much about Win 2K, but hope this helps.
<p>Warren Stramiello wrote:
<blockquote TYPE=CITE>Ok, folks... how the heck do I set up LILO to boot
to NT as well as
<br>Linux?
<p>Here's my partition setup for my boot drive:
<p>/dev/hda
<p>hda1 : 80mb blank FAT16 Partition (multi-purpose boot partition that
<br>isn't in use right now) (active)
<br>hda5 : Linux ext2 (Debian 2.2)
<br>hda6 : Linux swap
<br>hda7 : NTFS Windows2000 Partition (NT is installed into the Winnt
<br>directory)
<p>Here's my lilo.conf file info:
<p>boot=/dev/hda
<br>root=/dev/hda5
<br>compact
<br>install=/boot/boot.b
<br>delay=200
<br>map=/boot/map
<br>vga=normal
<br>image=/vmlinuz
<br>&nbsp;&nbsp;&nbsp; label=Linux
<br>&nbsp;&nbsp;&nbsp; read-only
<br>other=/dev/hda7
<br>&nbsp;&nbsp;&nbsp; label=Win2k
<br>&nbsp;&nbsp;&nbsp; loader = /boot/chain.b
<br>&nbsp;&nbsp;&nbsp; unstable
<p>I nabbed the other...unstable bits from a help page... and oddly enough,
<br>it doesn't work.
<br>Whenever I choose the Win2k option, it gives me a 'PRESS CNTRL-ALT-DEL'
<br>message which, when complied with, bumps me into LILO again.
<p>So what am I doing wrong, and how do I fix it?
<br>~Warren</blockquote>
</html>

--------------79E986ABD83B42B2C6FFBE13--