🚀 go-pugleaf

Try the OSS package that came with SuSE. I used it to install my SB 16 PNP.
Check the documentation to see if your card is supported. Then follow the
install directions. I know for mine i had to recompile the kerrnel with no
sound support and isapnp disabled.

al

Jason Carley <jcarley@optusnet.com.au> wrote in message
news:376CB4D0.84106F65@optusnet.com.au...
> Hi guys.  I have been trying for a long time to get my Awe 64 running
> under SuSE 6.1.
>
> I have compiled the kernel with sound support but get action not
> suported by device messages whenever I try to cat a sound file to
> /dev/sound or /dev/dsp.  Something is still wrong.  I have read all
> howtos but still can't work it out.  The output from cat /dev/sndstat is
> below.  Could it be a isapnp type problem, I haven't set that up yet?
>
> Any help greatly appreciated,
> Jason.
>
>
>
> OSS/Free:3.8s2++-971130
> Load type: Driver compiled into kernel
> Kernel: Linux home 2.2.6 #6 Sun Jun 20 17:28:50 EST 1999 i686
> Config options: 0
>
> Installed drivers:
> Type 1: OPL-2/OPL-3 FM
> Type 26: MPU-401 (UART)
> Type 2: Sound Blaster
> Type 29: Sound Blaster PnP
> Type 7: SB MPU-401
>
> Card config:
> (Sound Blaster at 0x220 irq 5 drq 1,5)
> (SB MPU-401 at 0x330 irq 1 drq 0)
> (OPL-2/OPL-3 FM at 0x388 drq 0)
>
> Audio devices:
>
> Synth devices:
>
> Midi devices:
>
> Timers:
> 0: System clock
>
> Mixers:

Jason Carley wrote:
> 
> Hi guys.  I have been trying for a long time to get my Awe 64 running
> under SuSE 6.1.
> 
> I have compiled the kernel with sound support but get action not
> suported by device messages whenever I try to cat a sound file to
> /dev/sound or /dev/dsp.  Something is still wrong.  I have read all
> howtos but still can't work it out.  The output from cat /dev/sndstat is
> below.  Could it be a isapnp type problem, I haven't set that up yet?
> 
> Any help greatly appreciated,
> Jason.
> 
> OSS/Free:3.8s2++-971130
> Load type: Driver compiled into kernel
> Kernel: Linux home 2.2.6 #6 Sun Jun 20 17:28:50 EST 1999 i686
> Config options: 0
> 
> Installed drivers:
> Type 1: OPL-2/OPL-3 FM
> Type 26: MPU-401 (UART)
> Type 2: Sound Blaster
> Type 29: Sound Blaster PnP
> Type 7: SB MPU-401
> 
> Card config:
> (Sound Blaster at 0x220 irq 5 drq 1,5)
> (SB MPU-401 at 0x330 irq 1 drq 0)
> (OPL-2/OPL-3 FM at 0x388 drq 0)
> 
> Audio devices:
> 
> Synth devices:
> 
> Midi devices:
> 
> Timers:
> 0: System clock
> 
> Mixers:

I think the default for MPU irq was -1

This may disable or set to emulate mpu but anyway it worked for me.

-- 
______________________________________________________________________
       "Captain, I just uploaded a virus called Windows to the
	Klingon computer system."
                                                      -Spock
Jay Daniels            Pc-Technical Services      
http://planttel.net/~pctech/                       pctech@planttel.net
______________________________________________________________________