Voodoo Rush and XFree86 4.0.1

Thread View: comp.os.linux.x

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by slesley Tue, 24 Oct 2000 00:00

#13

Author: slesley
Date: Tue, 24 Oct 2000 00:00

22 lines
1644 bytes

Anyone got XFree86 4.0.1 working with the AT3D/Rush chipset?

I am trying to get the new XFree86 4.0.1 to work with the Hercules
Stingray 128/3D.  I have 2D working with 3.3.6 and have had the 3D
working with 3.2?  I heard that the DRI is not supported with less than
a voodoo 3, but am still interested in getting it to work the old way.

It has the Alliance AT3D chipset on board.  I ran the XFree86
-configure, but when I test the generated XF86Config file the X server
locks up on me.

I assume that the configure is unable to generate an XF86Config file for
this video card, and I just need to talk to someone who has it working
and see what modules they loaded.  Or find out where I can get info on
the modules.  I have tried both compiling my own and the rpm packages.

I only found one other posting referencing the AT3D/Rush combination and
the same results were noted


Sent via Deja.com http://www.deja.com/
Before you buy.

Re: Voodoo Rush and XFree86 4.0.1

#14

Author: cfairman
Date: Sun, 29 Oct 2000 06:46

38 lines
2155 bytes

Same problem... Hope somebody figures this one out soon...

-Chris




In article <8t434e$285$1@nnrp1.deja.com>,
  slesley@my-deja.com wrote:
> Anyone got XFree86 4.0.1 working with the AT3D/Rush chipset?
>
> I am trying to get the new XFree86 4.0.1 to work with the Hercules
> Stingray 128/3D.  I have 2D working with 3.3.6 and have had the 3D
> working with 3.2?  I heard that the DRI is not supported with less
than
> a voodoo 3, but am still interested in getting it to work the old way.
>
> It has the Alliance AT3D chipset on board.  I ran the XFree86
> -configure, but when I test the generated XF86Config file the X server
> locks up on me.
>
> I assume that the configure is unable to generate an XF86Config file
for
> this video card, and I just need to talk to someone who has it working
> and see what modules they loaded.  Or find out where I can get info on
> the modules.  I have tried both compiling my own and the rpm packages.
>
> I only found one other posting referencing the AT3D/Rush combination
and
> the same results were noted
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.
>


Sent via Deja.com http://www.deja.com/
Before you buy.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads