🚀 go-pugleaf

In article <1991Mar10.230519.28588@zip.eecs.umich.edu>, don@eecs.umich.edu (Don Winsor) writes:
|> Two short (hopefully) easy questions:
|> 
|> 1)  Does anybody have Mach running on a 486 machine?  Are there any
|> known incompatibilities or should it work on most AT bus 486 machines,
|> as long as the other published system specifications are met?
|> ...
|> Don Winsor                                      University of Michigan
|> don@eecs.umich.edu                              313-764-8543

I am running Mach 2.5 and 3.0 on a 486 machine (its a PS/2 model 95, which
isn't an AT bus machine). I found no problems at all in doing so (other
than a problem with the hard disk driver which was related more to the
fact it was a SCSI drive than to the processor being a 486). I would 
expect that a AT bus 486 machine should probably work just fine, all 
other things being equal.

----------------------------------------------------------------
The above views are my own, not necessarily those of my employer.
Bill Webb (IBM AWD Palo Alto, Ca.), (415) 855-4457.
UUCP: ...!uunet!ibmsupt!webb INTERNET: webb@ibminet.awdpa.ibm.com