Mach2.5/i486 with Jumbo 250 MB Tape Drive

Thread View: comp.os.mach

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Shyhtsun Wu Wed, 23 Dec 1992 23:49

#1049

Author: Shyhtsun Wu
Date: Wed, 23 Dec 1992 23:49

17 lines
1142 bytes

I have a Jumbo 250 MB Tape drive, which is connected to the floppy controller.
When I boot up the machine, mach2.5 recongnizes two floppy drives:

     fd0:  Master 1 Slave 0    (/dev/fd0   1  0)
     fd1:  Master 1 Slave 1    (/dev/fd1   1 65),

and both of them are block devices.  I wonder if it is possible to have mach
recognize the tape drive device correctly. Any experience is highly
appreciated. Thanks in advance.

BTW, "fd0" is the 3'5" floppy drive and I do not have the second floppy drive.
-Felix

-- 
-----------------
Shyhtsun Felix Wu      wu@cs.columbia.edu          (212) 939-7086
450 Computer Science Building, Columbia University, NYC, NY 10027

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads