🚀 go-pugleaf

I ended up ditching the network card altogether and getting a
USB-Ethernet adapter. End of problem...

It was a little temperamental to install, but I'm up and running just
fine now. The ADS, Belkin or 3Com would be good choices based on my
(late night) research.

Good luck and feel free to write me privately if you need any help.

Regards,

CK


Don Turner wrote:

> We have the same PROBLEM!!!
> I have KT7A-RAID motherboard, AMD T-BIRD 1.2 GHZ, 256M RAM, two
> WD100EB hard drives in RAID 0, Diamond A50 AGP, no other devices except for
> Linksys LNE100TX in PCI slot 3. I can not see my other two computers on my
> network. I have spent hours with Linksys Tech Support, and with Micrososft
> Tech Support with no results. The NIC card has been changed out with one
> from of the
> computers that works OK with the Laptop. I have booted both computers to DOS
> and ran the Diag that came with Linksys Network In A BOX, and that works
> great,so I'm sure the network stuff is OK. Everything else on my system
> works fine, but then I don't have all that much other stuff like fancy sound
> cards and the like.
> SANDRA run great except for the Network stuff. Between Linksys,and Microsoft
> we have been over every thing at least 10 times with the NETWORK set up. I'm
> about to wear out my Win98SE cd from reloading W98. I'm at the point where I
> am fingering my credit card to order a different Motherboard. My feeling is
> there is something wrong in the PCI bus on this board. I have also tried the
> latest 4in1 drivers from VIA, and the BIOS is at WW.
> 
> Don Turner