🚀 go-pugleaf

NT has the ability to migrate disks and users from Novell itself - you do
not need 3rd party crap.  Word of warning though - make sure you check out
the articles and whitepapers at Microsoft first.  The procedure is there -
the product is free, the procedure is touchy.

Louis Chan <96Ecsc@alumni.ee.ust.hk> wrote in message
news:7s89r4$m71$1@hfc.pacific.net.hk...
> Dear Windows NT Expert,
>
> Can somebody can help me to answer my question?
>
> I am a Netware users, so I need to migrate to Windows NT platform
>
> 1. Do you know how to write for NT Login script file ( *.bat ) like the
>     command in the Netware Login script as follows
>
>     a.) if XXX belongs to group then ....
>     b.) if LoginName = "XXX" then
>
>
> 2. In the Netware, each users can be limited their storage capacity.
>    How can I do the same in Windows NT ?
>
> 3. How can I write the NT Login script so that I can assign "Path=XXX" to
>    the Login clients?
>    Note: I try to write "Path=XXX" or "set path = XXX" in the Login script
>          file ( *.bat ). But when finished the login script, clients PC
>          will then restore to their original path.
>
> 4. Disk Administratioin program can save important information ( like
>    Strip Volume ) into diskette. So the Mirror / Strip volume partition
>    can be resumed after re-installation of Windows.
>
>    However, during the above saving process, the program says there is not
>    enough space. Actually, a blank 1.44M diskette is used. How can I solve
>    the problem?
>
>
>  Best thanks an regards,
> Louis Chan, 96Ecsc@alumni.ee.ust.hk
>
>