NT4.0/3.51 and IBMPS2-9576I

Thread View: comp.os.ms-windows.nt.admin.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Andromeda Mon, 28 Apr 1997 00:00

#66

Author: Andromeda
Date: Mon, 28 Apr 1997 00:00

20 lines
1823 bytes

Hello there...

For evaluation purpose, I'm trying to install NT 4.0 on an old IBM PS2
model 95-76I.
This box is configured with IDE hard drive as is available from IBM. 
The problem I'm getting is that the drive cannnot be "seen" by the NT setup
program.
When the hardware detection is taking place (when the system is booting
from  the second diskette created in the first stage of the installation)
the type of the HDD controler "detected" is NONE.

The installation is taking place from the same HDD were the NT is to be
installed (from directory \I386).

Anybody came accross with this problem. I had simmilar problem in the past
with NT351 and IDE on PS2 76I.
Any help would be much appreciated !

George

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads