🚀 go-pugleaf

In article <4emmqr$82r@atlas.uniserve.com>, lkujala@uniserve.comt says...
>
>In article <4em2qn$fqa@newsbf02.news.aol.com>, jwrights@aol.com (JWrights) 
says:
>>
>>I have the same drive, but on an Adaptec VL bus SCSI system.  I also use
>>the NT  3.51 backup software.  I've never had any problems. Since the OS
>>doesn't use compression I wonder if that might be a problem.  I don't know
>>Arcadia's rep for reliability. Also, contact Conner and ask them about
>>alternate settings for your tape drive in the SCSI BIOS table.
>>
>>Regards
>
>Not sure what the orgional question was, but...
>
>I am using the Conner tape drive with an Adaptec PCI SCSI and NTBackup;
>if I turn on hardware compression in the software, the tape drive hangs.
>If I turn off hardware compression in the software, but leave the 
>hardware compression jumpered to on on the tape drive, no problems.
>
>Hope that helps.
>
>I've got the same Tdrive & Arc backup exec V6 it Works find
> but I was not Aware that you can get Hardware Compression,
>I always thought that you can get Compression through SOFTware 
>Only; but then Again that's my opinion.
>>>>>>>>>>>>>>>>>>>>>>juliust@jaxnet.com<<<<<<<<<<<<<<<<<<<<<<<<<<<