(no subject)

Thread View: comp.os.ms-windows.nt.misc

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Mike Berkowitz Fri, 05 Jan 1996 00:33

#16

Author: Mike Berkowitz
Date: Fri, 05 Jan 1996 00:33

10 lines
930 bytes

I have 3 new Celebris machines, each with a single, 4GB SCSI 
hard-disk.  I don't recall the exact model #, but this is the 
one with built in SCSI (Adaptec, if I'm not mistaken), Ethernet, 
sound and CD-ROM.  After (successfully) instaling NT 3.5.1, on 
rebooting the machines I consistently get a "blue-screen" NT 
crash, wherein it says that it can't access the boot device.

Any ideas as to what might be going wrong?

Mike

Re: (no subject)

#17

Author: Steve Lionel
Date: Fri, 05 Jan 1996 18:17

22 lines
1584 bytes

In article <30EC71E9.2170@compuserve.com>, Mike Berkowitz 
<100274.2317@compuserve.com> writes:
|>I have 3 new Celebris machines, each with a single, 4GB SCSI 
|>hard-disk.  I don't recall the exact model #, but this is the 
|>one with built in SCSI (Adaptec, if I'm not mistaken), Ethernet, 
|>sound and CD-ROM.  After (successfully) instaling NT 3.5.1, on 
|>rebooting the machines I consistently get a "blue-screen" NT 
|>crash, wherein it says that it can't access the boot device.

Probably the Celebris GL.  I would suggest you call Digital technical support
at 800-354-9000.  You have a three-year warranty on these systems with free
support. 
-- 

Steve Lionel                      Mail: lionel@quark.enet.dec.com
DEC Fortran Development           WWW:  http://www.digital.com/info/slionel.html
Digital Equipment Corporation     CompuServe: 75263,3001
110 Spit Brook Road, ZKO2-3/N30
Nashua, NH 03062-2698             "Free advice is worth every cent"

For information on DEC Fortran 90, see http://www.digital.com/info/hpc/f90/

Re: (no subject)

#18

Author: Pauwl Lunow
Date: Tue, 09 Jan 1996 10:34

9 lines
802 bytes

Is your CD-Rom possibly not SCSI, but NT setup is told (by itself or by 
you) that this is the case???

We had this problem. We then setup without CD-ROM auto-configured while 
setting up, and then added the drivers later. That worked fine.

I hope this helps.

Pauwl

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads