Article View: comp.os.ms-windows.nt.setup.hardware
Article #8ASUS Dual Pentium/120, NTAS 3.51+sp2, Adaptec 3940W causing 1st HD missing from stripped set
From: Wei-ming Lin
Date: Fri, 24 Nov 1995 07:07
Date: Fri, 24 Nov 1995 07:07
21 lines
1607 bytes
1607 bytes
PLEASE HELP!! I have at least installed NTAS 3.51 eight times on ASUS Dual Pentium/120MHz, 64MB, AHA-2940 for boot drive, AHA-3940W w/ 2 Seagate 2GB WideSCSI HD's! Everything seemed working at first, and I could create a stripped set from those 2 Seagate drives. But every time after I installed sp2, disk administrator would then tell me that the 1st HD was removed or off-line, and the stripped logical volume can not be used! Does anyone have the same experience? I noticed that there's a new AIC78XX.SYS in sp2. I tried to reinstall the original dirver distribution, but system locked up on the login screen fully after the reboot. Also I have to leave the next PCI slot open so that the 3940W can use that slot's assigned IRQ to find channel B. According to Adaptec, this is caused by MB/BIOS design bugs. Can anyon explain why, if that's the case? Many thanks in advance!! Wei-ming Lin p.s. If replied by e-mail, please send to weilin@symix.com
Technical Details
Message-ID:
<493qv5$3q3@charm.magnus.acs.ohio-state.edu>Path:
arc1-ca.pugleaf.net!magnus.acs.ohio-state.edu!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!magnus.acs.ohio-state.edu!news From: unixlan@pop.pitt.edu (Wei-ming Lin) Newsgroups: comp.os.ms-windows.nt.setup.hardware,comp.os.ms-windows.nt.setup.misc,comp.os.ms-windows.nt.admin.misc,comp.periphs.scsi,comp.sys.ibm.pc.hardware.storage Subject: ASUS Dual Pentium/120, NTAS 3.51+sp2, Adaptec 3940W causing 1st HD missing from stripped set Date: 24 Nov 1995 07:07:17 GMT Organization: The Ohio State University Message-ID: <493qv5$3q3@charm.magnus.acs.ohio-state.edu> NNTP-Posting-Host: slip6-9.acs.ohio-state.edu Mime-Version: 1.0 Content-Type: Text/Plain; charset=US-ASCII X-Newsreader: WinVN 0.99.7