SCSI Controller error (aic78xx)

Thread View: comp.os.ms-windows.nt.setup

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by T. Eric Tung Wed, 27 Dec 1995 19:25

Author: T. Eric Tung
Date: Wed, 27 Dec 1995 19:25

24 lines
1172 bytes

We have recently installed a Seagate Hawk SCSI-2 drive in our Window NT 3.51
Server.   The Event Viewer indicated that the system detects a controller error.
(driver: aic78xx.sys).   Once I removed this seagate drive, the error message
went away.   

This is the configuration:

    (internal drives)
	|----- HP SCSI-2 (TE enabled; ID = 0)
        | 
        |----- Seagate ST15230N 4G (TE disabled; ID = 1)
        | 
        | 
Adaptec AHA-2940 (Terminator disabled)
        |
	|---- Exabyte SCSI-2 tape drive (ID = 2; externally terminated)
    (external drives)


I also tried the latest driver (aic78xx.sys) from Adaptec.  It did not help.
Any suggestion is welcomed.


- Eric

Re: SCSI Controller error (aic78xx)

Author: Johannes Maier
Date: Sat, 30 Dec 1995 21:41

15 lines
821 bytes

Hi!

As i know, is this a confirmed bug in the nt-bug-list 3.51!

I´ve three NT-servers with the same error-message, but nearly 
all works correctly, this bug always appears if you use a 
scsi-card with an 7800-chip!

I hope it helps

mfg 
Johannes Maier

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads