🚀 go-pugleaf

Matt West wrote:
> 
> I hope someone may be able to shed some light on this problem :
> 
> When installing Windows 95 OSR2 (using the correct OEM preinstall
> tools), the installation routine freezes at the blue "Getting ready to
> run Windows for the first time" screen.
> The hardware is all new, and passes software diagnostic tests.
> Two new motherboards have been tried in this PC (both new LSI TX
> chipset boards) and the SIMMs have been replaced.  I have also tried a
> different hard drive.
> The only common part is the CPU, an IBM M2 P166+ MX.   Could this be
> the cause of the freezing ?

Power supply is not common?  and you started with as few components
installed as possible? You are SURE that the clock and bus ratio
jumpers are correct for the CPU?

It appears to be hanging at the point that Windows is setting
up PNP devices. You don't mention peripherals such as CD ROM 
and Sound card. You might copy the WIN95 directory from the
CD to the HD and run setup from there (disconnect the CD - Every
once in a while I run into a CD the Windows won't coexist with).

Please post the solution when you get it fixed.
-Andy