🚀 go-pugleaf

James Chow wrote:
> 
> I recently installed a secondary drive to my computer.
> 
> Now, Windows 95 automatically, renames my secondary
> drive as D:, and moves my CD-ROM to E:.
> 
> I am just wondering if it is possible to rename the
> second drive from D: to some other letter, since I want
> to keep using D: for my CD-ROM.
> 
> Another problem.
> When I boot up, the BIOS screen shows something along
> the lines:
> 
> Hard Disk 0 Installed WDC [serial number]
> Hard Disk 1 Installed WDC [serial number]
> CD-ROM Drive Installed XF [some number]
> Floppy A: Installed
> 
> Now, before I installed my second drive, the time between
> CD-ROM Drive Installed showing, and Floppy A: Installed was
> 10 seconds. After I had installed it, the time has shot up
> to 43 seconds!
> Can anyone explain why?
> I don't know, but my suspicion lies with the fact that
> CD-ROM has been set from Slave to Master.
> 
> Setup Information follows:
> OS- Windows 95
> I have two IDE interfaces on the M/B.
> Main hard disk: Western Digital 2.1 Gig
> Secondary hard disk: Western Digital 540Mb
> CD-ROM drive: Mitsumi Quad speed
> 
> Before: Primary Master- Main Hard Disk
>         Primary Slave- CD-ROM
>         Secondary- None
> After: Primary Master- Main Hard Disk
>        Primary Slave- Secondary Hard Disk
>        Secondary Master- CD-ROM
>        Secondary Slave- None
> In all cases the jumps have been set correctly
> to Master or Slave.
> 
> I have tried several different ways of setting
> up the primary/secondary master/slave combinations
> for the 2 hard disks and CD-ROM drives, but only
> this combination seemed to be detected by BIOS,
> although Windows is able to detect them.
> 
> All replies to be sent by email please.
> (My ISP seems to enjoy withholding news.)
> --
> James Chow
The two physical drives have to get letters first in DOS and 95, no way
around it.  Then come logical drives followed by mounted drives and then
CD Rom.  Way around it is to set 95 to have cd-rom at l or letter you
will never reach and install apps again or try new wizard in
Partitionmagic3.0 that will search a drive for references to d: and
switch them to e: if you confirm.
-- 
Gary White,  Michigan, USA