🚀 go-pugleaf

Bradley McAfee wrote in message <6m8jds$g0d$1@argentina.it.earthlink.net>...
>I would appreciate some PS/2 trouble shooting advice.
>
>I recently changed my serial mouse (com 1, irq  4) to a PS/2 mouse (PS/2
>port, irq 12). I enabled CMOS irq 12 for primary PS/2 mode, which is
>available. Win95 device wizard adds the mouse port with irq 12.
>
>The problem is that the PS/2 mouse only works in windows safe mode. In
>normal mode if I touch the mouse the system freezes and I have to reboot.
>
>Device manager in system resources does not show any conflict with other
>devices.
>
>I am using Win95 OSR2 with the following devices:
>
>Modem
>Serial Port
>Ethernet Card (PCI)
>SCSI Adapter (PCI)
>Soundcard
>S-VGA Card (PCI)
>3.5 floppy
>CD-ROM
>
>Is this an irq conflict? If not what could it be?

Try pulling out all your cards (except for video) and see if the motherboard
resources re-initialize themselves.  Be sure that PnP is enabled on the
motherboard.  Hopefully, IRQ 12 will be truely assigned to the PS/2 port.
Windows95 typically doesn't like to be told what and where things are in the
system resources by the user.  Windows95 prefers to find things on its own
and assign things on its own.

Sometimes, running ADD NEW HARDWARE (and saying "Yes", never say "No") will
re-awaken dormant ports that were previously ignored (depending on the BIOS
your motherboard has).


Technical Support
http://www.blackboxstudios.com