HP Ultra VGA Drivers

Article View: comp.os.ms-windows.setup

Article #1259

Back to comp.os.ms-windows.setup Previous Next

#1259

From: Robert Thompson (robertt)
Date: Wed, 27 Jan 1993 17:23

27 lines
1525 bytes


--
I am posting this on behalf of someone else.  

This person has an HP Vectra 486/66U with the HP Ultra VGA card installed.
When exiting Windows 3.1 after using 1024x768x265 mode, the computer
crashes.  If a different resolution is selected, the problem goes away.

The computer setup is as follows:

		Vectra 486/66U
		HP Scanject IIc
		400MB SCSI Disk (adaptek controller)
		Ultra VGA card (not that I haen't already told you :)

Are there any different drivers for this card than the ones supplied by HP
and if not does anyone know what chip set they use ? (I am assuming that it
is not the same as the ATI Ultra card).

-Robert

------------------------------------------------------------------------------
Robert Thompson                       |  Storage Technology Corporation
Redwood Digital Hardware Design Team  |  2270 South 88th. Street
(303) 673-7747   FAX: (303) 673-2568  |  Louisville, Colorado 80028-0211
------------------------------------------------------------------------------

Technical Details

Message-ID: <1993Jan27.172329.2356@stortek.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!mimbres.cs.unm.edu!ncar!csn!stortek!n33.stortek.com!robertt

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!mimbres.cs.unm.edu!ncar!csn!stortek!n33.stortek.com!robertt
From: robertt@n33.stortek.com (Robert Thompson (robertt))
Newsgroups: comp.os.ms-windows.setup
Subject: HP Ultra VGA Drivers
Message-ID: <1993Jan27.172329.2356@stortek.com>
Date: 27 Jan 93 17:23:29 GMT
Article-I.D.: stortek.1993Jan27.172329.2356
Sender: usenet@stortek.com
Organization: Storage Technology Corp.
Lines: 27
Nntp-Posting-Host: n33.stortek.com
X-Newsreader: TIN [version 1.1 PL6]