🚀 go-pugleaf

In article <aksurf-050193174533@131.215.9.51> aksurf@caltech.edu (Axel) writes:
>In article <wstuartj.725817837@lucky.ecn.purdue.edu>,
>wstuartj@lucky.ecn.purdue.edu (W Stuart Jones) wrote:
>> 
>> Has anyone had success configuring Windows for Work Groups for use with both
>> telnet capabilities and Novell 3.11 connectivity?  I'm hoping to use either
>> NCSA telnet and QVNET with in Windows for Work Groups.  Any advice or sample
>> configuration files would be greatly appreciated.
>> 
>STUFF DELETED....
>
>
>Hey, I too am looking for some information on how to do that. I am trying
>to run windows for workgroups and qvtnet. I have discovered that when I
>load the packet driver for NCSA telnet (In my case, it's called 8003pkdr
>for an SMC Elite 16 series ethernet card) and the interface TSR called
>pktint, QVTNET takes control of the network, i.e. it doesn't allow ms
>windows to access the network. If anyone out there knows of a TCP/IP NDIS
>configuaration compatible protocol, please let me know. Please E-mail me at
>aksurf@caltech.edu, and post on the network, since I am shure there will be
>others who need this info.
>
> Thanks, 
>
>
>                        Axel


I'm running Windows for Workgroups, DEC PathWorks, and WinQVT/Net, all at 
the same time. Here's a fragment of config.sys:

devicehigh=C:\WIN31\protman.dos /i:C:\WIN31		<== WFWG NDIS protocol manager
DEVICEHIGH=\DECNET\DISPKT\DIS_PKT9.DOS 			<== NDIS to packet shim
DEVICEHIGH=C:\WIN31\depca.dos					<== NDIS driver for 
													Pathworks & WFWG
devicehigh=C:\WIN31\workgrp.sys					<== WFWG


and my PROTOCOL.INI from the windows directory:

[network.setup]						<== WFWG
version=0x3100
netcard=ms$ewtrb,1,MS$EWTRB
transport=ms$netbeui,MS$NETBEUI
lana1=ms$ewtrb,1,ms$netbeui

[protman]							<== Protocol manager
DriverName=PROTMAN$
PRIORITY=MS$NETBEUI

[MS$EWTRB]							<== NDIS driver settings
DriverName=DEPCA$
RamAddress=0xD000
Interrupt=5
MaxMulticast=8
MaxTransmits=16
AdapterName=DE200

[MS$NETBEUI]						<== Transport (NETBEUI)
DriverName=netbeui$
SESSIONS=10
NCBS=32
BINDINGS=MS$EWTRB
LANABASE=1							<== changed this from LANABASE=0 
										for Pathworks connectivity

[PKTDRV]							<== packet driver specs			
drivername = PKTDRV$
bindings = MS$EWTRB
intvec = 0x7b						<== use this int. vector in QVT 
										(or choose one of your own)

[DATALINK]							<== lifted out of the PathWorks
DRIVERNAME   = DLL$MAC					protocol.ini
LG_BUFFERS   = 16
SM_BUFFERS   = 6
OUTSTANDING  = 32
HEURISTICS   = 0
BINDINGS     = MS$EWTRB
NI_IRQ = 5

I needed to alter the Pathworks STARTNET.BAT file to:
-	Replace the NETBIND line with c:\windows\net start
-	disable the redir.exe line

and rem out the NET START line WFWG put in autoexec.bat.

Then, after booting, I start the network, start PKTINT and then windows.

I don't really know what I'm doing, but I got it to work by talking to 
Microsoft. I already had Pathworks and QVT running together when I added 
WFWG. I don't know how Netware fit's in, but I think if you add the 
DIS_PKT9.DOS line to your config.sys and the [PKTDRV] stuff to protocol.ini
it should work.

HTH
===========================================================================
|        Tom Carter                    |     carter@cemvax.cem.msu.edu    |
|  Michigan State University           |     carter@msucem.bitnet         |
|    Chemistry Department              |                                  |
===========================================================================