🚀 go-pugleaf

In article <30ef4a06.14632944@news.enter.net> feinberg@enter.net (Richard Feinberg) writes:

>On Sun, 07 Jan 1996 01:30:07 GMT, brent@netaxis.com (brent demar)
>wrote:

>>
>>
>>
>>I have a future domain 1680 scsi host adapter a ez drive and win95
>>dosn't seem to reconize it, i do add new hard ware and it finds it and
>>trys to set it up but then after i reboot and go to device manager it
>>says that the card is either not in or no drivers are setup and
>>something else, then it says error code 10. But what is weird is that
>>when i have the dos drivers loaded for the cd-rom(i had it setup in
>>win 3.1) windows reconizes the drive but i'am not supposed to have the
>>dos drivers loaded right?!??? PLEESE HELP GETTING DESPERATE
>>
>>                                       brent@netaxis.com
>you need aspi support. get future domain power scsi drivers and
>software. it is available from the ADAPTEC FTP site in the FUTURE
>DOMAIN subdirectory. My config.sys for Windows 95 looks like this:

>FILES=50
>DEVICE=C:\WINDOWS\HIMEM.SYS
>DEVICE = D:\TEAC\TEAC_CDI.SYS /D:TEAC-CDI
>REM BY PWRSCSI! ** DEVICE=D:\WINDOWS\SMARTDRV.EXE /DOUBLE_BUFFER
>REM ** Future Domain PowerSCSI! v4.1 Support **
>DEVICE=C:\PWRSCSI!\DCAM950.EXE /CA00 5 
>DEVICE=C:\PWRSCSI!\INT4BCAM.SYS 
>DEVICE=C:\PWRSCSI!\ASPIFCAM.SYS /D /O
>REM ******* End PowerSCSI! v4.1 Support *******
>REM ---Added for SyQuest SCSI Driver---
>DEVICE=C:\SyQuest\SCSI\SQDRIVER.SYS  
>SHELL=C:\COMMAND.COM C:\ /E:2048 /P
>BUFFERS=17

Richard,
You don't need to load those future domain driver at all with windows 95.  My 
FD1680 and config.sys doesn't anything and win95 can see my cdrom, disk 
drives, tape drive and MO drive.

Brent,
I saw the problem you described a while back.  I don't have any idea why it 
behaves like that.  The only thing I can think of is BIOS version, mine is 3.4

Daniel Tran - dtran@ucla.edu
ps:  oops ... I didn't read the message careful enough.  I don't have a 
syquest drive so I don't know.  May be Richard is right.

On Sun, 07 Jan 1996 01:30:07 GMT, brent@netaxis.com (brent demar)
wrote:

>
>
>
>I have a future domain 1680 scsi host adapter a ez drive and win95
>dosn't seem to reconize it, i do add new hard ware and it finds it and
>trys to set it up but then after i reboot and go to device manager it
>says that the card is either not in or no drivers are setup and
>something else, then it says error code 10. But what is weird is that
>when i have the dos drivers loaded for the cd-rom(i had it setup in
>win 3.1) windows reconizes the drive but i'am not supposed to have the
>dos drivers loaded right?!??? PLEESE HELP GETTING DESPERATE
>
>					brent@netaxis.com
you need aspi support. get future domain power scsi drivers and
software. it is available from the ADAPTEC FTP site in the FUTURE
DOMAIN subdirectory. My config.sys for Windows 95 looks like this:

FILES=50
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE = D:\TEAC\TEAC_CDI.SYS /D:TEAC-CDI
REM BY PWRSCSI! ** DEVICE=D:\WINDOWS\SMARTDRV.EXE /DOUBLE_BUFFER
REM ** Future Domain PowerSCSI! v4.1 Support **
DEVICE=C:\PWRSCSI!\DCAM950.EXE /CA00 5 
DEVICE=C:\PWRSCSI!\INT4BCAM.SYS 
DEVICE=C:\PWRSCSI!\ASPIFCAM.SYS /D /O
REM ******* End PowerSCSI! v4.1 Support *******
REM ---Added for SyQuest SCSI Driver---
DEVICE=C:\SyQuest\SCSI\SQDRIVER.SYS  
SHELL=C:\COMMAND.COM C:\ /E:2048 /P
BUFFERS=17

Hi,

brent@netaxis.com (brent demar) wrote:

>I have a future domain 1680 scsi host adapter a ez drive and win95
>dosn't seem to reconize it, i do add new hard ware and it finds it and
>trys to set it up but then after i reboot and go to device manager it
>says that the card is either not in or no drivers are setup and
>something else, then it says error code 10. But what is weird is that
>when i have the dos drivers loaded for the cd-rom(i had it setup in
>win 3.1) windows reconizes the drive but i'am not supposed to have the
>dos drivers loaded right?!??? PLEESE HELP GETTING DESPERATE

I have exactly the same problems with my DC-226 TEKRAM SCSI-2
controller, I tried to install the drivers for AHA154X... 

Any help greatly appreciated !

Regards,

/Christer

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 * High Tech Horizon - Christer Johansson - * email: cj@algonet.se * 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 * Vi saljer Parallax, Inc. BASIC Stamp's produkter i Skandinavien * 
    >> World Wide Web - http://www.algonet.se/~cj/catalog.html <<    
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

cj@algonet.se (Christer Johansson) wrote:

=>Hi,

=>brent@netaxis.com (brent demar) wrote:

=>>I have a future domain 1680 scsi host adapter a ez drive and win95
=>>dosn't seem to reconize it, i do add new hard ware and it finds it and
=>>trys to set it up but then after i reboot and go to device manager it
=>>says that the card is either not in or no drivers are setup and
=>>something else, then it says error code 10. But what is weird is that
=>>when i have the dos drivers loaded for the cd-rom(i had it setup in
=>>win 3.1) windows reconizes the drive but i'am not supposed to have the
=>>dos drivers loaded right?!??? PLEESE HELP GETTING DESPERATE

=>I have exactly the same problems with my DC-226 TEKRAM SCSI-2
=>controller, I tried to install the drivers for AHA154X... 

=>Any help greatly appreciated !

=>Regards,

=>/Christer

Running Adaptec AVA-1505 (EZ-SCSI-2) as my second SCSI-2 controller...
Win95 recognised it staright up - as well as finding the external EZ-Drive when
it's connected.

Good luck... It really does work - and well !

MC

>=>>I have a future domain 1680 scsi host adapter a ez drive and win95
>=>>dosn't seem to reconize it, i do add new hard ware and it finds it and
>=>>trys to set it up but then after i reboot and go to device manager it
>=>>says that the card is either not in or no drivers are setup and
>=>>something else, then it says error code 10. But what is weird is that
>=>>when i have the dos drivers loaded for the cd-rom(i had it setup in
>=>>win 3.1) windows reconizes the drive but i'am not supposed to have the
>=>>dos drivers loaded right?!??? PLEESE HELP GETTING DESPERATE
>
>=>I have exactly the same problems with my DC-226 TEKRAM SCSI-2
>=>controller, I tried to install the drivers for AHA154X... 

>Running Adaptec AVA-1505 (EZ-SCSI-2) as my second SCSI-2 controller...
>Win95 recognised it staright up - as well as finding the external EZ-Drive when
>it's connected.
>
>Good luck... It really does work - and well !

	Go to SyQuest's WWW site and search for technical bulletin #2007,
which refers to this exact problem.  The main gist of this three page
bulletin is for owners of SyQuest removable drives to add the following
line to the "386enh" section of their Windows 95 "system.ini" file:

RemovableIDE=TRUE

	...punctuation is important, so enter this line exactly as shown
above...and, good luck!