Re: Plotting problem using PADS-PCB

Article View: comp.os.msdos.apps

Article #2566

Back to comp.os.msdos.apps Previous Next

#2566

From: Chris Holland
Date: Sun, 15 Nov 1992 16:28

9 lines
731 bytes

I had a similar problem printing to a plotter, and found that I had overlooked
the setting for flow-control, you don't mention the setting you have for flow
control, and by your problem I would guess it is set to none, try 'hardware
control'

Hope this helps - it sorted my problem out!

Chris

Technical Details

Message-ID: <Bxrn4A.4zr@brunel.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!ukma!usenet.ins.cwru.edu!agate!doc.ic.ac.uk!uknet!brunel!cs89cmh

References: <1992Nov14.045258.25569@dec8.ncku.edu.tw>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!ukma!usenet.ins.cwru.edu!agate!doc.ic.ac.uk!uknet!brunel!cs89cmh
From: cs89cmh@brunel.ac.uk (Chris Holland)
Newsgroups: comp.os.msdos.apps
Subject: Re: Plotting problem using PADS-PCB
Message-ID: <Bxrn4A.4zr@brunel.ac.uk>
Date: 15 Nov 92 16:28:58 GMT
References: <1992Nov14.045258.25569@dec8.ncku.edu.tw>
Organization: Brunel University, Uxbridge, UK
Lines: 9
X-Newsreader: TIN [version 1.1 PL6]

Reply to Parent Message