🚀 go-pugleaf

	Windows keeps dying with this message:

  "Windows could not continue due to a paging error."

Or very close to that.  I eliminated all the QEMM "Exception 13"
problems by not running any of my TSRs (I'll come back to that later
:-), but this problem persists.  It happens after I've started lots of
DOS apps (between 4 and 8) running full screen, and always occurs when
I'm Alt-Esc'ing from the app back to Windows.  The User's Guide has
almost no information on system errors, and MS doesn't have an 800
number for support!  I'll call them tomorrow, but thought I'd tap the
immense bank of net knowledge as well.  Thanks for any and all
suggestions.

Here's my setup:

Hardware:
	33MHz 386 clone (reputable dealer in town, for what that's worth)
	100MB toshiba disk (or was it Hitachi?)
	Paradise VGA+ card with 512K

Software: (pared down to isolate this problem)
	DR DOS 5.0 (loaded in low mem) - no RAM disk, etc.
	QEMM 5.1 - just QEMM386.sys.  Nothing loaded high.
	Windows 3.0 - brand spanking new.  I ran "configure DOS
		applications" after installing Windows.  Other than
		that, it's straight off the disks.

I'll try using HIMEM.SYS from Microsoft tonight and see if I can
reproduce the problem.

	-Paul Tobin
	 pgt@hpfcla.fc.hp.com