Compaq Pro Linea

Thread View: comp.os.msdos.desqview

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by silvia Thu, 21 Jan 1993 22:20

#1851

Author: silvia
Date: Thu, 21 Jan 1993 22:20

9 lines
872 bytes

I having a problem with a friend 486/25SX Prolinia by Compaq.
When Qemm 6.02 goes to run the optimize it locks up the computer and the A: stays lit.
I have to reboot the computer and then restart it with the old config.sys and Autoexec.bat. 
The Computer's components: 4megs, 486/25sx, VGA, 120megs HD, & Compaq DOS.
From what I know i would venture to say it was the Compaq DOS. But I'm not sure.
Any help would be appreciated. Oh the dos Version is 5.0.


        Manolo

Re: Compaq Pro Linea

#1865

Author: mike batchelor
Date: Sat, 23 Jan 1993 03:54

16 lines
861 bytes

silvia@rcf.rsmas.miami.edu writes:
>
> I having a problem with a friend 486/25SX Prolinia by Compaq.

You will no longer have a problem with your friend's Prolinea if you
add the NT parameter to the QEMM386 device.

device=c:\qemm\qemm386.sys RAM NT

It will boot up and optimize with this command line.

[] ---
[] Mike Batchelor <> Long Beach, California
[] mike@batpad.lgb.ca.us <or> mikebat@qdeck.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads