qemm and sound blaste

Thread View: comp.os.msdos.desqview

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by quarterdeck canada Sun, 24 Jan 1993 00:23

#1882

Author: quarterdeck canada
Date: Sun, 24 Jan 1993 00:23

25 lines
1490 bytes

JM>I recently installed a Sound Blaster Pro in a machine that has been
JM>running QEMM (6.03) for some time.  I cannot get the Sound Blaster "READ"
JM>program (the text to speech program) to work with QEMM loaded.  Any
JM>suggestions?

JM>Note: I have not tested any third party software with the SB, nor have
JM>I tried any of the bundled utils except for SBTALK/READ and PARROT.
JM>PARROT, incidentally, works fine, but READ locks the machine up solid
JM>*and* mungs the CMOS (when QEMM is loaded).  (It works fine if booted
JM>w/o QEMM.)  I have tried several different QEMM lines in CONFIG.SYS.

Try changing the interrupts or the DMA channels on the Sound Blaster
board.  Some users have also noted that the DMA=128 paramter on the
QEMM386 line in CONFIG.SYS helps.

Regards,

Michael Bolton
Tech Support
Quarterdeck Canada  (416) 360-5758  quarterdeck.canada@canrem.com
---
 þ DeLuxeý 1.25 #6922 þ QRAM does NOT turn exTENded into exPANded
--
Canada Remote Systems  - Toronto, Ontario
World's Largest PCBOARD System - 416-629-7000/629-7044

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads